160 TYROS Owner’s Manual
158
Appendix
Installing the Optional Speakers
Make sure that you have all of the parts below, included in the TRS-MS01 speaker package, as well as a Phillips
screwdriver to assemble the system.
1Turn the TYROS’ power off, and disconnect the AC power cord. Also, make
sure to disconnect the keyboard from any other external devices.
2Remove the four screws from the rear panel of the TYROS.
3Using the screws you removed in step #2 above, fasten the two speaker
brackets to the rear panel of the TYROS.
4Fasten the satellite speakers to the left and right brackets.
5Use the RCA pin cables to connect the speakers to the respective outputs
on the TYROS.
Satellite
speakers (2)
Subwoofer
speaker (1)
Speaker
brackets (2)
RCA pin
cables (2)
RCA pin/8-pin
combination cable (1)
31 2 OUTIN OUTIN VIDEO OUT
NTSC/PAL
USB
12 INPUT AC INLET
MIC / LINE IN
L/L+RR
MAIN
SUBLINE OUT
L/L+RR
LOOP SENDMIDI A MIDI BASSIGNABLE FOOT PEDAL
TRIM
MINMAX
L/L+RR
AUX IN / LOOP RETURN
TRIM
MINMAX(VOLUME)(DSP VARIATION)(SUSTAIN)
TO LEFT SPEAKER
TO SUB
WOOFER
LR
TO RIGHT SPEAKER L/L+RR
LOOP SEND
Installation screws for
speaker brackets
31 2 OUTIN OUTIN VIDEO OUT
NTSC/PAL
USB
12 INPUT AC INLET
MIC / LINE IN
L/L+RR
MAIN
SUBLINE OUT
L/L+RR
LOOP SENDMIDI A MIDI BASSIGNABLE FOOT PEDAL
TRIM
MINMAX
L/L+RR
AUX IN / LOOP RETURN
TRIM
MINMAX(VOLUME)(DSP VARIATION)(SUSTAIN)
TO LEFT SPEAKER
TO SUB
WOOFER
LR
TO RIGHT SPEAKER L/L+RR
LOOP SEND
• Either bracket can be fastened to
either location.
Place the speaker on
the bracket.
Adjust the direction of the speaker as desired,
then fasten it securely to the bracket.
• Either speaker can be placed on
either bracket.
• If you want to change the direction
of the satellite speaker, unfasten it
from the bracket by rotating the
lever, then adjust the speaker
position as desired, and fasten it
to the bracket again.
• Either cable can be used for either
location.