Yamaha TYROS - page 20

20 TYROS Owner’s Manual

This section contains information about setting up your TYROS and preparing to play. Be sure to read through this

section carefully before turning the power on.

1Make sure the POWER ON/OFF switch on the TYROS is set

to OFF.

2Connect the supplied power cord to the AC INLET terminal

on the instrument’s rear panel.

3Connect the other end of the power cord to an AC outlet.

Make sure your TYROS meets the voltage requirement for

the country or region in which it is being used.

Since the TYROS has no built-in speakers, you’ll need to use an external speaker system — such

as the optional TRS-MS01, which is designed speciﬁcally for the TYROS. For instructions on

installing the TRS-MS01 to the TYROS, see page 160.

Power Supply

• Make sure your TYROS is rated for the AC

voltage supplied in the area in which it is to

be used (as listed on the rear panel). Con-

necting the unit to the wrong AC supply can

cause serious damage to the internal cir-

cuitry and may even pose a shock hazard!

• Use only the AC power cord supplied with

the TYROS. If the supplied cord is lost or

damaged and needs to be replaced, contact

your Yamaha dealer. The use of an inappro-

priate replacement can pose a ﬁre and shock

hazard!

• The type of AC power cord provided with the

TYROS may be different depending on the

country in which it is purchased (a third

prong may be provided for grounding pur-

poses).

Improper connection of the grounding con-

ductor can create the risk of electrical shock.

Do NOT modify the plug provided with the

TYROS. If the plug will not ﬁt the outlet, have

a proper outlet installed by a qualiﬁed electri-

cian. Do not use a plug adapter which

defeats the grounding conductor.

Optional Speaker

Shown here is the optional L-7S

Keyboard Stand.

Starting Up