Yamaha TYROS - page 70

Folder/File Operations using the Open/Save Display

Basic Operations — Organizing Your Data

70 TYROS Owner’s Manual

Naming Folders/Files

Folders and ﬁles on the installed drives can be freely renamed. You can also name ﬁles you’ve created.

The instructions below apply when calling up the Name operation from the Open/Save display. For other cases, go directly to

step #5 below.

1Call up the page (path) of the Open/Save display, where the relevant folders/ﬁles are

located.

2Press the [NAME] LCD button (lower [1] button) at the bottom the LCD display.

The pop-up window for the Name operation appears at the bottom of the display. To return to the

original display, press the [CANCEL] LCD button.

3Select the desired folder or ﬁle to be named.

4Press the [OK] LCD button (lower [7] button).

The pop-up window for entering the name appears at the bottom of the display. To return to the orig-

inal display, press the [CANCEL] LCD button.

5Input the name of the selected folder or ﬁle.

6Press the [OK] LCD button (lower [8] button) to actually enter the new name for the

item and return to the original display.

DATA ENTRY

ENTER

12345678

Change the type of character by using the [1] up button.

●If you select Japanese as the Language in the [FUNCTION] → UTILITY → OWNER display

(page 158), the following different types of characters and sizes can be entered:

• (kana-kan)....Hiragana and kanji, marks (full size)

• (kana)..............Katakana (normal size), marks (full size)

• (kana)................Katakana (half size), marks (half size)

•

ABC

......................Alphabet (capital and small letters, full size), numbers (full size),

marks (full size)

•

ABC

.........................Alphabet (capital and small letters, half size), numbers (half size),

marks (half size)

●If you’ve selected a language other than Japanese in the [FUNCTION] → UTILITY →

OWNER display (page 158), the following types of characters are available:

• CASE........... Alphabet (capital letters, half size), numbers (half size), marks (half size)

• case............. Alphabet (lowercase letters, half size), numbers (half size), marks (half

size)

Move the cursor to the desired position by using

the [DATA ENTRY] dial. Press the [OK] LCD button (upper [8] button) to

actually enter the new name and return to the

original display.

Press the appropriate button,

corresponding to the character

you wish to enter.

Several different characters are

assigned to each button, and

the characters change each

time you press the button.

To actually enter the selected

character, move the cursor or

press another letter-input but-

ton.

Select the desired upper row menu by using

the upper LCD [1] - [8] buttons.

Deletes the character at the cursor.

Press the [CANCEL] LCD button (lower [8] but-

ton) to delete all of the characters on the line at

once and return to the original display.

Pressing this (lower [6] button) before actual entry of the character adds a special charac-

ter mark (umlaut, accent, Japanese “ ” and “ ”) to the character.

Pressing this (lower [6] button) after actually entering a character calls up the miscella-

neous character list. Move the cursor to the desired mark by using the [DATA ENTRY] dial,

then press the [OK] LCD button (upper [8] button) or [ENTER] button to enter the character

and return back to the Name original pop-up window.

Call up the ICON SELECT display by pressing the lower [1] button.

This lets you change the icon at the left of the ﬁle name.

• The example pop-up menu shown here

appears when the Language parameter is set

to “ENGLISH” on the [FUNCTION]

→

UTIL-

ITY

→

OWNER display (page 158) and the

type of characters here is set to “ABC (half

size).”

Select the desired lower row menu by using the

lower LCD [1] - [8] buttons.