Yamaha 006IPTO-F0, WD83390

Setting the Stereo Out and Bus Out 1–8 from the Display 87

DM1000 Version 2—Owner’s Manual

Bus Outs

CFader

This fader adjusts the Stereo Out output levels, and links with the [STEREO] fader. The

fader knob is highlighted when the fader is set to 0.0 dB.

•Bus Out (1–8) Fader page

AON/OFF

This button turns the currently-selected Bus Out (1–8) on or off, and links with the

[ON] (9–16) button in the Master layer.

BFader

This fader sets the currently-selected Bus Out (1–8) level, and links with the fader (9–16)

in the Master layer. The fader knob is highlighted when the fader is set to 0.0 dB.

CTO ST PAN

This control sets the Bus Out to Stereo Out Pan position for the currently-selected Bus

Out (1–8).

DTO ST ON/OFF

This button turns on or off the Bus Out to Stereo Out signal for the currently-selected

Bus Out (1–8).

ETO ST Fader

This fader sets the Bus Out to Stereo Out signal level for the currently-selected Bus Out

(1–8).

Tip: The TO ST PAN, ON/OFF, and TO ST Fader parameters also appear on the Routing

| Bus to St page.

345