Functions that can be assigned to user-defined keys
257
LS9-16/32 Owner’s Manual
Appendices
Functions that can be assigned to user-defined keys
Function PARAMETER 1 PARAMETER 2 LED Explanation
NO ASSIGN Dark No assignment
SCENE
RECALL —
Flash
Recall the currently selected scene
STORE Store to the currently selected scene
SCENE +1, LIST UP
SCENE +1 selects the next scene number. LIST UP scrolls
the scene list upward by one. Simultaneously pressing
[SCENE ] and [SCENE ] keys will return to the current
scene number. After scene 300, wrap around to scene
000.
SCENE -1, LIST DOWN
SCENE -1 selects the previous scene number. LIST UP
scrolls the scene list upward by one. Simultaneously press-
ing [SCENE ] and [SCENE ] keys will return to the cur-
rent scene number. After scene 000, wrap around to scene
300.
INC RECALL Recall the scene of the next existing number
DEC RECALL Recall the scene of the previous existing number
DIRECT RECALL SCENE #000–#300 Directly recall the scene of the specified number
RECALL UNDO Lit if UNDO is possi-
ble Execute RECALL UNDO
STORE UNDO Lit if UNDO is possi-
ble Execute STORE UNDO
TALKBACK
TALKBACK ON
LATCH ON: lit, OFF: dark Switch TALKBACK on/off
UNLATCH ON: lit, OFF: dark Turn TALKBACK on while pressed
SELECTED CH
ASSIGN Lit if assignment is
the same
When you press this key, the previously-stored assignment
state will be applied. While holding down this key, press a
SEL key of an output channel to switch the assignment on/
off, and its state will be remembered. During this time, the
[SEL] LED will be lit if assign is ON, or dark if OFF.
OSCILLATOR
OSCILLATOR ON ON: lit, OFF: dark Switch the OSC on/off
When this turns on, the OSC popup window will appear
SELECTED CH
ASSIGN Lit if assignment is
the same
When you press this key, the previously-stored assignment
state will be applied. While holding down this key, press a
SEL key of an output channel to switch the assignment on/
off, and its state will be remembered. During this time, the
[SEL] LED will be lit if assign is ON, or dark if OFF.
CUE CLEAR Flash Clear all CUE settings together
MONITOR
MONITOR ON ON: lit, OFF: dark Switch MONITOR on/off
SELECTED CH
ASSIGN Lit if assignment is
the same
When you press this key, the previously-stored assignment
state will be applied. While holding down this key, press a
SEL key of a MIX or MATRIX channel to switch the assign-
ment on/off, and its state will be remembered. During this
time, the [SEL] LED will be lit if assign is ON, or dark if OFF.
SOURCE SELECT
STEREO L/R,
MONO(C), LCR, 2TR
IN L/R, INPUT 15/16
{31/32}, PLAYBACK
OUT, DEFINE
Lit if the selected
monitor source is on Recall the selected signal to the monitor
DIMMER ON ON: lit, OFF: dark Switch the monitor dimmer function on/off
MONO MONITOR ON: lit, OFF: dark Switch MONO MONITOR on/off
MONITOR ON MAS-
TER FADER ON: lit, OFF: dark
If this is on, you can use the master fader to control the
monitor level, and the ON key to switch the monitor out-
put on/off
EFFECT BYPASS RACK 5–8 ON: lit, OFF: dark Bypass the specified effect
TAP TEMPO
CURRENT PAGE Blink in synchroniza-
tion to the tempo
Use the tap tempo function in the displayed screen
RACK 5–8 Use the tap tempo function for the specified effect
MUTE MASTER MUTE GROUP 1–8 ON: lit, OFF: dark Switch MUTE GROUP MASTER on/off
METER
PEAK HOLD ON ON: lit, OFF: dark Turn the meter PEAK HOLD function on/off
STEREO/MONO(C)
SEL MONO (C): lit, STE-
REO: dark Switch the top panel STEREO L/R METER function