Yamaha XH200, XM4080, XM4180 Connection

XM4180/XM4080/XH200 Owner’s Manual 11

You may also connect speakers with different rated inputs

to different channels or connect speakers with different

rated input to the same channel, as shown below:

Be sure to use speakers that support the

XH200’s line-out voltage of 70V or 100V.

You cannot connect a low-impedance speaker

directly to the XH200. In this case, be sure to use

a speaker transformer (such as the Yamaha

ST15). Follow the instruction guide that came

with the speaker transformer to avoid excessive

loads.

Connection

1If the wire insertion ports are closed, turn the screws on

top of the connector counterclockwise to open the ports.

2Insert the wires into the appropriate ports, following the

indication of the pole on the input terminal, turn the

screws on top of the connector clockwise to ﬁx the

wires.

3Attach the Euroblock connector to the input terminal on

the unit.

Total rated input of speakers : 200W

20 W x 10 speakers (200W)

10W

10 W x 20 speakers (200W)

10W 10W 20W 20W 20W

5 W x 10 speakers (50W) 15 W x 10 speakers (150W)

5W 15W5W 15W

5W 15W

+–G

Use a screwdriver

to ﬁx the wires.