Play the Pads/Pedals
16 DD-65/YDD-60 Owner’s Manual
The instrument contains a total of 254 high quality drum sounds plus 25 drum phrases (see the
“Drum Voice List” page 38)—and you can assign these freely to each of the 8 drum pads and 2 ped-
als. Try assigning some different voices and save your own “CO1CO3” Custom Drum Kits.
• Custom Kit “ CO1CO3and “ 01drum kit contents are the same until modified (see the
“Drum Kit List” page 41).
1Press the [ASSIGN] button.
2Turn the dial and select a Custom Kit “CO1CO3
for saving.
3Select a pad or pedal to be assigned.
4Select a Voice Number.
Repeat the previous steps 3 and 4 for any or all of the pads and ped-
als.

Assigning Voices to Individual Pads and Pedals and saving to a Custom Kit (“

CO1

CO3

”)

When you press the [ASSIGN] button, the button’s lamp lights, and
C01” appears on the display.
Strike any pad one time (or press a pedal), and the currently assigned
voice number for that pad/pedal is shown in the display.
You can select the voice by repeatedly striking the pad or repeatedly
pressing the pedal (while listening to the voice), or by turning the
DIAL.
Striking the pad or pressing the pedal to select a voice.
Every time the pad is struck or a pedal is pressed, voice numbers will
increase by a value of one (1). In this method, you can hear and select
an assigned voice.
Using the DIAL to select a voice.
Turn the DIAL to the right (clockwise), and voice numbers will
increase. Turn the DIAL to the left (counter-clockwise), and voice
numbers will decrease.
See the “Drum Voice List” on page 38.
NOTE
CO1CO3CO2CO1202791202127911920 21