Play the Pads/Pedals
17
DD-65/YDD-60 Owner’s Manual
5Save to a Custom kit.
After you’ve assigned the voice, the instrument will automatically be
set to the assigned custom kit.
You can now play the voice you have assigned to the pad/pedal.
Different depths of the DD-65/YDD-60’s reverb effect can be added to the DD-65/YDD-60’s overall
sound.
1Press the [REVERB] button.
2To turn Reverb off, press the [REVERB] button
again. (Make sure that the lamp is not lit.)
1Enter the Reverb type setting function.
2Change the reverb type by turning the DIAL.
3Press the [FUNCTION] button to exit from the
Function mode.
Press the [ASSIGN] button to save to a Custom kit (the lamp will be
off).
To cancel the saving, simply press the [KIT], [SONG] or [DEMO]
button.
Setting the Reverb ON/OFF
When you press the [REVERB] button the button’s lamp lights, and
the ambience of a room or concert hall is added to the sound.
Setting the Reverb type
Press the [FUNCTION] button once, then press the [DRUM 1] or
[DRUM 2] button a number of times until the “rbt” item appears.
The currently selected Reverb type number appears next to the “rbt”
indication.
CO1Lamp is on
rbt●R
ever
b
type
Li
st
No. Reverb Type No. Reverb Type
1 Hall 1 6 Stage 1
2 Hall 2 7 Stage 2
3 Hall 3 8 Plate 1
4 Room 1 9 Plate 2
5 Room 2 10 Off