Yamaha YPT-410 - page 21

Create Original Sounds

YPT-410 Owner’s Manual 21

1Select the voice you want to play on the keyboard.

The name of the currently selected voice will appear in the display when

you press the [VOICE] button. Use the dial to select the desired voice.

For this example we want to use a synth-lead type voice, so select “97

SquareLd” (Square-wave Lead).

2Press the [ASSIGN] button as many times as necessary to

select “z FILTER” (“z” will appear in the display).

Knob A can now be used to adjust the ﬁlter cutoff frequency, and Knob

B can be used to adjust the resonance.

3Rotate Knob B to its maximum setting (all the way to the

right).

Rotating the knob to the right while the volume is set to a high level can

result in distortion. If this occurs, reduce the volume level.

Using the Knobs

097

SquareLd

097

SquareLd

“z” appears here.

Filter

Resonance

Filter

Cutoff