Using the subwoofer

3VOLUME

2

For Asia and General models

 

Subwoofer top panel

 

POWER

 

VOLTAGE SELECTOR See page 4 for details.

(Australia model)

 

 

English

 

1

SUBWOOFER SYSTEM YST-FSW100

VOLUME

POWER

3

2

VOLUME

 

Subwoofer top panel

OFF/

SYSTEM

(U.S and CANADA model)

ON

 

 

1

SUBWOOFER SYSTEM YST-FSW100

VOLUME

POWER

Subwoofer rear panel

4

INPUT

INPUT

(U.S and CANADA model)

1POWER indicator

Lights up GREEN when the POWER switch (2) is turned ON. When the subwoofer is connected using system connection, light up green by turning on the switch of the connected component. ( The System connection: See page 4 for more details.)

Pre-adjusting the subwoofer volume

Before you use the subwoofer, first adjust the volume balance between the subwoofer and the front speakers by following the procedure below.

1.Set the VOLUME control to minimum (0).

2.Turn on the power to all other components.

3.Press the Power switch to the ON position. Turn on the power switch of the connected component When the subwoofer is connected using system connection.

4.Play a source that contains low-frequency sounds. Adjust the amplifier’s volume control to the desired listening level.

5.Increase the volume gradually to adjust the volume balance between the subwoofer and the front speakers. To enjoy natural bass sound, keep the subwoofer volume at a level where it is barely distinguishable from other speakers.

6.Adjust the volume of the entire sound system using the amplifier’s volume control.

Note: It is recommended to set the

VOLUME

VOLUME control about in the middle position when using in a multi channel home theater system.

2Power switch

Press this switch to the ON position to turn on the power to the subwoofer. When the power of the subwoofer is on, the power indicator (1) on the top panel lights up green. Press this switch again to set it to the OFF position to turn off the power of the subwoofer.

3VOLUME control

Adjusts the volume level. Turn the control clockwise to increase the volume, and counterclockwise to decrease the volume.

4INPUT terminal

Input terminal for line level signals from the amplifier.

5