Connections

Refer to page 2 for system connections.

Rear Panel (right cabinet) (Refer to page 3)

1INPUT 1 and 2: These are 3.5 mm jack connections for inputting signals to the YST-M5s. Using these two inputs will mix two input signals.

For example, you may connect your CD-ROM player and personal computer to these input terminals.

2TO LEFT SPEAKER: This should be connected to the TO RIGHT SPEAKER connection on the left-channel cabinet using the supplied 3.5 mm stereo mini plug cable.

3OUTPUT (ADJ. VOL): This 3.5 mm stereo jack outputs the input signal after the VOLUME control.

4DC 9V: Connect the supplied AC-DC adaptor to this connection.

Rear Panel (left cabinet)

5TO RIGHT SPEAKER: This should be connected to the TO LEFT SPEAKER connection on the right cabinet using the supplied 3.5 mm stereo mini plug cable.

Controls

Front Panel (right cabinet) (Refer to page 3)

6POWER Switch and Indicator: Press to power on the YST-M5s; the power indicate will light up. Press again to power off. Before powering on and off, turn down the VOLUME control.

7PRESENCE control: This control allows frequency boost and cut of up to ±7 dB at 10 kHz. This tends to emphasize vocals,

providing a warmer intimate sound. Turn it clockwise to boost, and counterclockwise to cut.

8VOLUME control: Use this control to set the volume level. Turn it clockwise to increase the volume, and counterclockwise to reduce it.

Specifications

Type

Active Servo Technology Speaker System

Output power

3 W/ch. (1 kHz, 4 Ω at 10% T.H.D.)

Input sensitivity

200 mV (1 kHz, 4 Ω at 3 W)

Input Impedance

25 kΩ

 

Frequency response

90 to 20 kHz ± 3 dB

Speaker unit

6.5 cm (2.5") full-range cone, magnetic

 

shielding

 

Output Impedance

450 Ω

 

Output level

0.6 V (at 200 mV Rated Input)

Power supply

 

 

U.S.A. and Canada models

AC 120 V, 60 Hz

Australia and U.K. models

AC 240 V, 50 Hz

Europe model

 

AC 230 V, 50 Hz

Dimensions (WHD) 82 (3 7/32") 210.7 (8 5/16") 123.7 (4 7/8")

 

mm

 

Weight

0.6 kg (1.3 lbs)/Right channel unit

 

0.52 kg (1.1 lbs)/Left channel unit

Accessories

AC-DC adaptor 1

3.5mm stereo mini plug cable 2 legs

*Specifications subject to change without notice.

Cabinet Legs

The legs supplied with the YST-M5s should be stuck onto the bottom of each speaker cabinet as shown. As well as preventing the YST-M5s from slipping around, these legs also isolate the cabinet from the mounting surface.

5

English