Controls

Front Panel (right cabinet) (Refer to page 5)

6 (power) switch and indicator: Press the (power) switch to turn on the YST-M8; the indicator will light up. Press it again to turn off. Before turning on and off, turn down the VOLUME control.

7VOLUME control: Use this control to set the volume level. Turn it clockwise to increase the volume, and counterclockwise to reduce it.

8TONE control: This control allows frequency boost and cut up to ±7 dB at 10 kHz. This tends to emphasize vocals, providing a warmer intimate sound. Turn it clockwise to boost, and counterclockwise to cut.

9 (headphones) jack: Use this jack to connect stereo headphones for monitoring. No sound is output from the speakers or the OUTPUT (ADJ.VOL.) jack when headphones are connected.

Specifications

TypeActive Servo Technology

 

English
Output power5 W + 5 W (1 kHz, 4 Ω)
Input sensitivity200 mV (1 kHz, 4 Ω at 5 W)
Input Impedance25 kΩ

 

 

 

 

 

Frequency response

80 Hz to 20 kHz

 

 

Speaker unit

6.5 cm (2.5") full-range cone, magnetic shielding

 

Output Impedance600 Ω

 

 

Output level0.9 V (at 200 mV Rated Input)

 

Power supplyDC 12 V

 

 

U.S.A. and Canada modelsAC 120 V, 60 Hz

 

Europe and U.K. modelsAC 230 V, 50 Hz

 

Australia model

 

AC 240 V, 50 Hz

 

Dimensions (WHD)

86 (3 3/8") 216 (8 1/2") 130 (5 1/8") mm

 

Weight0.7 kg (1 lb 9 oz.)/Right channel unit

 

 

0.6 kg (1 lb 5 oz.)/Left channel unit

 

FinishYST-M8 W: Computer white

 

 

YST-M8 B: Black

 

AccessoriesAC adaptor 1

 

 

 

3.5 mm stereo mini plug cable 1

 

 

RCA plug cable 1

 

 

8 non skid pads 1

 

* Specifications subject to change without notice.

Non skid Pads

The pads supplied with the YST-M8 should be stuck onto the bottom of each speaker cabinet as shown. As well as preventing the YST-M8 from slipping around, these pads also isolate the cabinet from the mounting surface.

7