Right main speaker
Amplifier
● To connect with a YAMAHA DSP amplifier (or AV receiver), connect the SUBWOOFER (or LOW PASS etc.) terminal on the rear of the DSP amplifier (or AV receiver) to the L/MONO INPUT terminal of the subwoofer.

CONNECTIONS

Caution: Plug in the subwoofer and other audio/video components after all connections are completed.

Connect the subwoofer to the line output (pin jack) terminal(s) of the amplifier.

● When connecting the subwoofer to the SPLIT SUBWOOFER terminals on the rear of the DSP amplifier, be sure to connect the L/MONO INPUT terminal to the “L” side and the R INPUT terminal to the “R” side of the SPLIT SUBWOOFER terminals.

Left main speaker

Subwoofer cable (not included)

Subwoofer

INPUT

INPUT

/MONO

AUTO

PHASE

STANDBY

 

 

 

 

OFF LOW HIGH

NORM REV

POWER

ON

OFF

To AC outlet

Audio pin cable

(not included)

 

SPLIT SUBWOOFER

SUBWOOFER (LOW PASS)

Notes

●Some amplifiers have line output terminals labeled PRE OUT. When you connect the subwoofer to the PRE OUT terminals of the amplifier, make sure that the amplifier has at least two sets of PRE OUT terminals. If the amplifier has only one set of PRE OUT terminals, do not connect the subwoofer to the PRE OUT terminals.

●When connecting to a monaural line output terminal of the amplifier, connect the L/MONO INPUT terminal.

E-4