Connecting the AC power cable
POWER
ON
OFF
(U.S.A. model) | To AC outlet |
| |
| POWER |
| ON |
| OFF |
<U.S.A., Canada, Europe and Korean models>
When all connections are completed, plug the included power cable into the AC IN socket of the subwoofer, and then plug in the power cable to the wall outlet.
Notes
●Never connect any power cable other than the included one to the subwoofer. Otherwise, it may result in causing fire or an electrical shock.
●Do not connect the included power cable to any other unit than this subwoofer.
<U.K. and Australia models>
Plug in the subwoofer to the wall outlet.
(U.K. model)
To AC outlet
NOTES ABOUT THE REMOTE CONTROL
Battery installation
3 1
2
Battery replacement
If you find that the remote control must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones.
Notes
●Use only AA, R6,
●Be sure the polarities are correct. (See the illustration inside the battery compartment.)
●Remove the batteries if the remote control will not be used for an extended period of time.
●If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
Remote control operation range
Remote control sensor
Within approximately 6 m (20 feet)
30 |
| ° |
° | 30 | |
|
|
Notes
●There should be no large obstacles between the remote control and the main unit.
●If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the remote control not to work correctly. In this case, reposition the main unit to avoid direct lighting.