Storing preset data of the VOLUME control etc.

You can store preset data of the VOLUME control, the HIGH CUT control, the PHASE button and the B.A.S.S. switch as a set. Each of the three PRESET buttons on the remote control is used to store (and recall) one set of data. With this function, you can recall any preset data easily according to the source.

 

2

1

3

To store

1 Adjust the VOLUME control, the HIGH CUT control, the PHASE button and the B.A.S.S. switch.

2 Press the MEMORY button. The PRESET number indicators on the front panel flash.

3 Press the PRESET 1 button. The corresponding PRESET number indicator illuminates. This shows that the data has been stored in PRESET 1.

*In the same way, store other sets of data in PRESET 2 and 3.

 

 

 

3

 

 

SUBWOOFER SYSTEM YST-SW1500

 

 

 

 

PRESET

 

 

 

MUSIC/MOVIE

PHASE 1

2

 

3

STANDBY/ON

B.A.S.S.

HIGH CUT

VOLUME

 

 

40Hz

140Hz

0

10

1

*The default setting of each PRESET button is suitable for using the following Yamaha speaker system with this subwoofer.

PRESET 1: NS-8HX, NS-6HX

PRESET 2: NS-4HX

PRESET 3: NS-2HX

Notes

●A new setting can be stored in place of the former one.

●While the VOLUME control or the HIGH CUT control is rotating from a PRESET button having been pressed, pressing another PRESET button is ineffective.

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if the POWER switch is set off or the power plug is disconnected from the AC outlet or the power is cut due to temporary power failure. If, however, the power is lost for more than one week, the memory may be erased. If so, it can be re-stored by simply following the steps described above.

E-16