CONNECTIONS

Caution: Plug in the subwoofer and other audio/video components after all connections are completed.

All connections must be correct, that is to say L (left) to L, R (right) to R, “+” to “+” and to ”. Also refer to the owner’s manual for each of your components.

Basically, connect the subwoofer to the line output (pin jack) terminal(s) of the amplifier. (Refer to pages 4 and 5 for details.) If your amplifier does not have any line output terminal, connect the subwoofer to the speaker output terminals of the amplifier. (Refer to pages 6 and 7 for details.)

Connecting to line output (pin jack) terminals of the amplifier

Connect the main speakers to the speaker output terminals of the amplifier.

To connect with a YAMAHA DSP amplifier (or AV receiver), connect the SUBWOOFER (or LOW PASS etc.) terminal on the rear of the DSP amplifier (or AV receiver) to the L/MONO INPUT2 terminal of the subwoofer.

When connecting the subwoofer to the SPLIT SUBWOOFER terminals on the rear of the DSP amplifier, be sure to connect the L/MONO INPUT2 terminal to the “L” side and the R INPUT2 terminal to the “R” side of the SPLIT SUBWOOFER terminals.

Using one subwoofer

Right main speaker

Left main speaker

Subwoofer

 

 

 

 

 

 

OUTPUT

INPUT

 

 

 

 

INPUT2 STANDBY

+

TO SPEAKERS

+

 

OUTPUT

 

 

AUTO PHASE

 

 

2

+

+

 

 

 

 

+

+

 

 

 

 

INPUT

1

POWER

/MONO

+ – – +

FROM AMPLIFIER

INPUT

1

To AC outlet

SPLIT SUBWOOFER

Amplifier

SUBWOOFER (LOW PASS)

*Illustration shows YST-SW205.

4