Yard-Man 247.37979 manual Six-Speed

Step 13. Squeeze the belt together and push it		Step 16.	Place the new belt over the transmission
forward. Press the control arm inward towards the		pulley. Start the belt in the pulley groove and
deck and remove the six speed cable from the		rotate the pulley until the belt is seated in the
slot.		transmission pulley.
Six-Speed		Step 17. Place the belt between the idler pulley and the
	Belt	belt keeper bracket.
Cable Slot		Step 18. Using pliers, rotate the belt keeper bracket so
Control		that it snaps into slot on the idler bracket.
		Step 19.	Tighten the idler pulley bolt and lock nut half a
Arm
		turn using two 7/16” wrenches.
		Transmission
		Pulley
		Belt
		Belt Keeper
		Bracket		Transmission
Step 14. Pivot the control arm down away from the		Idler Pulley
		Bracket
pulley and belt.
		Idler Pulley
Six-Speed
Cable Slot		Bolt and
		Locknut

Control

Arm

Step 15. Lift off the lower pulley assembly and remove	Step 20. Place the belt between the two pulley halves
the old belt from around the crankshaft.	on the crankshaft. Make sure to route the belt
	inside the belt guard pin.
Lower Pulley
Half	Upper
Crankshaft	Pulley
	Half
	Tab	Belt
Belt	Belt	Lower
	Guard	Pulley
	Pin	Half
	IMPORTANT: When replacing the belt, do not disas-
	semble the lower pulley assembly.

20