Making Adjustments, Replacing Rear Flap

Replacing Rear Flap

•To remove rear flap, cut off the flat end of the wire rod which secures it to the deck. See Figure 15 .

•Attach the new flap and new rod to deck, bending the ends of the new rod over to secure to deck.

	Rear Discharge
Handle	Door
Bracket
	d
	o
	R
	e
	r
	i
	W
		Handle
	Rear Flap	Bracket
	Rear Flap

Figure 15

SECTION 8: MAKING ADJUSTMENTS

Adjusting Handle Height

Your mower is shipped with the handle in the higher height position. To lower height, proceed as follows.

•Remove the starter rope from the rope guide.

•Remove the upper handle by removing the hand knobs and carriage bolts. Lay upper handle out of the way, being careful not to bend or kink cables.

•Remove the hairpin clips from the weld pins on the handle brackets. Refer to Figure 4 .

•Remove the carriage bolts and wing nuts from the handle brackets. Press out on the legs of the lower handle. Remove lower handle from the mower.

•Turn the lower handle around so the notch on

the bottom of the lower
handle is facing forward
as shown in the box
here. Reassemble,	Lower	Notch
placing the bottom	Lower	Notch
placing the bottom	Handle
holes in the handle over	Handle
holes in the handle over
the weld pins in the
handle mounting
bracket.

•Reassemble the upper handle to the lower handle.

•Insert hairpin clips in the inner holes of the weld pins and replace the carriage bolts and wing nuts on the handle brackets. Attach the starter rope as instructed in the “Assembling Your Lawn Mower” section.

Adjusting Cutting Height

IMPORTANT: All wheels must be placed in the same relative position. For rough or uneven lawns, move the height adjustment lever to a higher position. This will help stop scalping of the grass.

An adjusting plate and
An adjusting plate and			Adjustment
thumb lever at each wheel			Adjustment
position provides cutting			Lever
position provides cutting
height adjustment. Each
adjusting plate has nine
height positions. Height of
cut will change when you
move the thumb lever
from one position to
from one position to
another.

•Simply depress the lever towards the

wheel and move the lever assembly to desired position. See the illustration in the box above.

Adjusting Carburetor

NOTE: A dirty air cleaner may cause an engine to run rough too. Make sure that the air cleaner is clean and attached to the carburetor before deciding to adjust the carburetor.

WARNING: If any adjustments are made to the engine (e.g. carburetor) while the engine is running, keep clear of all moving parts. Be careful of heated surfaces like the muffler.

To adjust carburetor, please follow the engine manual.

437 specifications

The Yard-Man 437 is a creative solution for homeowners seeking to enhance their outdoor maintenance experience. With its rugged design and powerful performance, it stands out as a reliable tool for tackling various yard tasks. The model boasts a compact size, making it easy to maneuver around tight spaces, while still providing ample cutting power required for efficient lawn care.

One of the main features of the Yard-Man 437 is its robust engine. Equipped with a reliable four-stroke engine, it ensures not only robust performance but also lower emissions, contributing to a cleaner environment. This engine delivers impressive torque, allowing the Yard-Man 437 to handle thick grass and challenging terrain effortlessly.

Another notable characteristic of the Yard-Man 437 is its cutting system. It comes outfitted with a wide cutting deck that can be adjusted for different grass heights. The deck’s sturdy construction can handle rough use while maintaining precision in cutting. Additionally, the model incorporates mulching capabilities, enabling homeowners to recycle grass clippings back into the lawn, promoting healthier soil and reducing waste.

For user convenience, Yard-Man has integrated several modern technologies into the 437. It features an easy-start system that allows for quick ignition, saving precious time on busy mornings. The model also utilizes a self-propelling mechanism, which significantly reduces the physical exertion required during operation, especially on slopes or uneven ground.

The cutting height can be easily modified with just a simple lever adjustment, allowing users to customize their mowing to suit varying grass types and conditions. Moreover, the 437 is designed with comfort in mind. It has an ergonomic handle that provides a comfortable grip and minimizes vibration, enhancing the overall mowing experience.

Durability is another important aspect of the Yard-Man 437. Built with high-quality materials, it is designed to withstand the rigors of regular lawn maintenance. Coupled with its maintenance-friendly design, which allows for easy access to engine components, this model ensures longevity and reliability in performance.

In summary, the Yard-Man 437 is an excellent choice for those seeking a powerful, efficient, and user-friendly lawn mower. Its combination of a robust engine, advanced cutting system, ease of use features, and durable construction make it a standout model in the realm of outdoor power equipment. Whether for small yards or larger properties, the Yard-Man 437 proves itself capable and reliable, delivering optimal results with every use.

Yard-Man 437 manual Making Adjustments, Replacing Rear Flap, Adjusting Handle Height

Models: 437