Yard-Man 7200-0 manual Changing Engineoil, Lubricationpoints, END of Season Storage

LUBRICATION-

CHANGING ENGINEOIL

Drain oil when engine is warm. To drain oil, place pan under frame directly beneath oil drain extension. Remove oil drain cap and allow oil to drain completely. Replace drain cap and tighten securely. Refill to "Full", approxi- mately 1 pint. Seeengine manual for complete engine lub. rication and service instructions.

LUBRICATIONPOINTS

lUBRICATE THE PARTS PERIODICAllY AS IllUS-TRATED. The following points are to be lubricated every

five hours of operation with SAE 20 weight light duty oil. unless otherwise noted.

1.Spherical Bearings (Both Sides)

2.Wheels

3.Discharge Spout

4.Blower Housing

5. Reel Chain' .;':

6.Chute Adjustment Chain

7.Chain Guard Bushing

8.Universal Joint

9.	Reel	Bearings		;.:,
10.	Cable	Rollers		,..
				,1
11.	Idler	Arm & Linkage
12.	Clutch Handle		Pivot	:~'
13.	Shift	Yoke Slide		"AFTER
	BREAK IN PERIOD (FIRST 3 TO 4 HOURS OFOPERATION).
		CHECK	All	BOLTS AND NUTS FORTIGHTNESS.

END OF SEASON STORAGE

In the event the engine is to be stored for any length oftime (30 days or more) or at the end of the snow throwing

season,prepare it asoutlined in the following steps:

1.Drain gas tank completely. by J_emoving-fuel line -at the carburetor or fuel "tank, whichever is easier.2.

Drain the carburetor by pressing upward on the bowl drain.3.

To protect the engine when storing, remove the spark- plug and inject one ounce of SAE 10 weight oil through the sparkplug hole into the cylinder. Crank the engine (without starting) severaltimes to spread the oil over the cylinder walls.4.

Lubricate all lubrication points as outlined in Lubrica- tion Section.5.

Handles can be removed to savespace by disconnecting master clutch rod, universal joint and shift lever.