TROUBLESHOOTING
UNIT WILL NOT START
C A U S E | A C T I O N |
Unit is unplugged | Check cord to make sure it is plugged into an electrical outlet |
Starter button or bail were improperly used | Press in starter button, hold it, and hold bail |
Overload protection switch has popped out | Push it in and follow the Starting Instructions |
|
|
MOTOR IS ON, BUT ROTOR WILL NOT TURN
C A U S E | A C T I O N |
Belt is damaged | Replace the belt, according to Inspecting/Replacing the |
| Driver Belt |
|
|
UNIT LEAVES A THIN LAYER OF SNOW ON PLOWED SURFACES
C A U S E | A C T I O N |
Scraper is worn | Replace the scraper |
|
|
If further assistance is required, contact your authorized service dealer
SPECIFICATIONS |
|
|
|
|
|
MOTOR* |
|
Motor type......................................................................................................................................... | A.C.,120 Volts Electric |
Operating RPM......................................................................................................................................... | up to 14,000 rpm |
Ignition Switch................................................................................................................................. | Bail Lock Safety Button |
Amperage............................................................................................................................................................... | 8.5 amps |
Overload Protection .......................................................................................................................... | 120V, 15 amp Breaker |
|
|
DRIVE SHAFT ASSEMBLY AND SNOW THROWER UNIT* |
|
Handles ............................................................................................................................................................... | Steel Tube |
Approximate Unit Weight ............................................................................................................................... | 20 lbs. (9 kg.) |
Snow Depth (maximum) .................................................................................................................. | 6 inches (0.152 meters) |
Cleared Path Width..................................................................................................................... | 12.5 inches (0.318 meters) |
*All specifications are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice.
13