SECTION 6: CONTROLS

Gear Selection

Handle

Handle Height

 

 

Adjustment

Handle

Clutch

Lock

Adjustment

Handle

 

(Side to Side)

 

(Bail)

 

(Model 420 Only)

 

Depth

 

 

Stake

 

Figure 12

GEAR SELECTION HANDLE

The gear selection handle is located on the front of the handle assembly (right hand handle on Model 420). It is used to select NEUTRAL, REVERSE, or one of the FORWARD modes.

This tiller is designed for the gear selection handle to be moved while the engine is running. (It will be difficult to obtain all four positions with the engine off.) Pull or push the handle so that the indicator on top of shift cover points to the area of the operating mode desired. See Figure 12.

NOTE: If difficulty is encountered in moving the gear selection handle, refer to following helpful hints. To shift into forward or reverse wheel drive, move tiller forward slightly, then backward, to allow the gears to synchronize.

To shift into forward wheels and tine drive, push forward slightly on the gear selection handle and slowly engage the clutch handle allowing the gears to synchronize. To stop forward movement, and tine drive, release the clutch handle. Do not shift gears with the clutch handle engaged except when engaging the tines.

REVERSE—Reverse wheel drive only. NEUTRAL—Transmission is in neutral.

FORWARD Modes:

Wheels Forward— Forward wheel drive only. Tines Reverse— Forward wheel drive and reverse tine drive.

WARNING: Make certain unit is in NEUTRAL when starting the engine.

CLUTCH HANDLE - (Bail)

The clutch handle (bail) is located beneath the handle. See Figure 12. Squeezing the clutch handle against the handle engages the wheel and tine drive mechanisms.

THROTTLE CONTROL

The throttle control lever is located on the engine. It controls the engine speed and stops the engine. See Figure 13.

CHOKE LEVER (Model 410/420)

The choke lever is located above the throttle. It is used to enrich the fuel mixture in the carburetor when starting a cold engine. See Figure 13.

PRIMER BUTTON (Model 415)

The primer button is located behind the air cleaner. It is used to enrich the fuel mixture in the carburetor when starting a cold engine. See Figure 13.

DEPTH STAKE

The depth stake controls the tilling depth. Refer to ‘‘How to Use Your Tiller’’ section on page 10.

HANDLE ADJUSTMENT (See Figure 12)

The handle may be adjusted to the height desired. Loosen the handle height adjustment lock a few turns. Pivot handle up or down to desired position. Tighten lock.

On Model 420, the handle may also be adjusted to be in line with the tiller, or swung to the left or right so the operator is not walking in the freshly tilled soil. To adjust the handle position from side to side, pull the handle adjustment handle back, pivot the tiller handle to desired position and release the handle.

8

Page 8
Image 8
Yard Machines 410, 420 manual Controls, Gear Selection Handle, Throttle Control, Depth Stake

420, 410 specifications

The Yard Machines 410 through 429, 21" Rear Discharge Push Mower is a robust and versatile lawn care solution designed for homeowners who prioritize efficiency and convenience. This highly regarded mower stands out in the market thanks to its state-of-the-art features and technology that enhance mowing performance.

One of the main features of the Yard Machines push mower is its 21-inch cutting deck, specifically designed for optimal maneuverability and efficiency in both small and medium-sized yards. The rear discharge functionality allows for a clean and controlled cut, ensuring grass clippings are evenly distributed behind the mower, which helps to improve the lawn's overall health by returning nutrients to the soil.

Equipped with a powerful 140cc engine, the Yard Machines mower provides reliable performance for tackling various grass types and yard conditions. The engine's design prioritizes fuel efficiency, allowing homeowners to mow larger areas without frequently stopping for refueling. The easy-start mechanism enhances user experience, ensuring that the mower starts quickly with minimal hassle.

Another key characteristic is the adjustable cutting height feature, which offers six different settings, ranging from 1.25 inches to 3.75 inches. This versatility allows users to customize their mowing experience based on the specific needs of their lawn and prevailing weather conditions. Whether you need a close cut for a formal look or a higher cut for more foliage, this mower can accommodate your preferences.

The Yard Machines 410 through 429 models also excel in user comfort and ease of use. The lightweight design ensures that even less experienced operators can maneuver the mower effortlessly. Additionally, the ergonomic handlebar provides a comfortable grip and helps to reduce fatigue during extended mowing sessions.

Durability is another standout aspect of this mower, as it features a sturdy steel deck that can withstand the rigors of regular use, ensuring longevity and reliability. Furthermore, the mower's compact size allows for easy storage, even in tight spaces.

Overall, the Yard Machines 410 through 429, 21" Rear Discharge Push Mower is an excellent choice for homeowners seeking a reliable, efficient, and user-friendly option for maintaining their lawns. With its combination of powerful performance, adjustable features, and durability, this mower is designed to make lawn care an effortless and enjoyable task.