Yard Machines E660G Operation, Operating Controls Shift Lever, Traction / Auger Control Lock

Models: E600E E640F E660G E610E E6C0F

1 28
Download 28 pages 41.22 Kb
Page 7
Image 7
SECTION 5: OPERATION

SECTION 5: OPERATION

OPERATING CONTROLS

SHIFT LEVER

The shift lever is located in the center of the handle panel. The shift lever may be moved into one of eight positions. Run engine with throttle in the fast position. Use the shift lever to determine ground speed. See Figure 8.

Forward - There are six speeds. Position number one (1) is the slowest. Position number six (6) is the fastest.

Reverse - There are two reverse (R) speeds. “R” closest to the operator (all the way back) is the faster of the two.

Auger

Traction / Auger

Control Lock

Control

 

 

Shift

 

Lever

TRACTION / AUGER CONTROL LOCK

The traction control is located on the right handle. Squeeze the control to engage the wheel drive. Release to stop.

This same control also locks the auger control so you can turn the chute directional control without interrupting the snow throwing process. If the auger control is engaged with the traction control engaged, the operator can release the auger control (on the left handle) and the augers will remain engaged. Release the traction control to stop both the augers and wheel drive (auger control must also be released). See Figure 8.

CHUTE DIRECTIONAL CONTROL

The chute directional control is located on left hand side of the snow thrower. See Figure 8.

To change the direction in which snow is thrown, turn chute directional control as follows:

1.Crank clockwise to discharge to the left.

2.Crank counterclockwise to discharge to the right.

SAFETY IGNITION SWITCH

The ignition key must be inserted in the switch before the unit will start. Remove the ignition key when snow thrower is not in use. See Figure 10.

 

Chute

 

 

 

 

 

 

Directional

 

 

 

 

 

 

Control

 

 

 

 

 

AUGER CONTROL

6

 

TRACTION

 

 

 

 

 

CONTROL

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

FUEL SHUT-OFF VALVE

The fuel shut-off valve, located under fuel tank, controls fuel flow from tank. (If equipped) See Figure 9.

Closed OPERATING CONTROLS

Open TRACTION / AUGER CONTROL LOCKCHUTE DIRECTIONAL CONTROL

Figure 9

F 1

CHUTE DIRECTIONAL CONTROL

R R1

R2

CLOCKWISE TO DISCHARGE LEFT

COUNTER CLOCKWISE TO DISCHARGE RIGHT

Figure 8

AUGER CONTROL

The auger control is located on the left handle. Squeeze the control to engage the augers. Release to stop the snow throwing action. (Traction control must also be released.) See Figure 8.

Choke

Primer

 

 

Rope Starter

Ignition

Handle

Throttle

Key

Control

 

Figure 10

7

Page 7
Image 7
Yard Machines E660G Operation, Operating Controls Shift Lever, Traction / Auger Control Lock, Chute Directional Control