English-32
OPERATION
the right wheel is reduced and the machine
turns to the right.
Turning on the spot (zero turn) can be
achieved by moving one control backward
(behind the neutral position) and carefully
moving the other steering control forward
from its neutral position.
Operating on hillsRead the Safety Instructions ���Driving on Slopes” in the
“Safety Instructions”.
The slowest speed possible should be used
•
before starting up or down hills.
Avoid stopping or changing speed on hills.•
If stopping is absolutely necessary, pull drive •
levers into the neutral position and push
to the outside of the unit and engage the
parking brake.
To restart movement, release the parking •
brake.
Pull the control levers back to the center •
of the mower and press forward to regain
forward motion.
Make all turns slowly.•
WARNING!
Do not drive up or down hills with
slopes greater than 10 degrees.
Do not drive across slopes.
IMPORTANT INFORMATION
When in reverse, control levers return to
neutral when released. This may cause
the mower to suddenly stop.
8061-019
Released parking brake
8061-011
Place controls in neutral position to stop