d. Reinstall the bottom two bolts on both sides.(A tapered punch may be needed to help align the holes.)
e. Retighten all four bolts both sides and remove jack.
5.Using the chart(on page 7), find the correct number of spacers to be placed under the caster swivel.(see fig. 2)
NOTE: To achive the best quality cut, the blades should be level with the ground or slighty tipped forward.
REAR DECK ADJUSTMENT
CARRIAGE BOLTS(a)
POSTION A
POSTION B
POSTION C
(b)
Figure 1
CASTER HEIGHT ADJUSTMENT
1/2" ”C”- SPACERS
CASTER
SWIVEL
MACHINERY BUSHING
Figure 2
6
