SAFETY

TRANSPORTATION:

Turn off fuel valve and strap mower to trailer.

MAINTENANCE:

1.Keep all nuts, bolts and screws tight to keep mower in safe operating condition.

2.Engine maintenance should comply with engine manufactures specifications. See the engine manual for specifications.

3.Never store the mower with gas in the tank inside a building where fumes can reach an open flame or spark.

4.To reduce the risk of fire, keep the mower free of grass, leaves and excessive grease or

oil.

5.Have your mower inspected and serviced each year by an authorized Yazoo/Kees dealer.

6.Use only authentic Yazoo/Kees replacement parts to insure the safety and quality of your mower is maintained.

7.Safety decals should be replaced if they are missing or illegible. Decals can be purchased from your Yazoo/Kees dealer.

8.The hydraulic system including all hoses and fittings should be checked frequently for wear or leaks. Never check for leaks with your hands, use a piece of cardboard or wood. Hydraulic oil under pressure could be injected into your body and must be surgically removed within a few hours.

EQUIPMENT SETUP AND ADJUSTMENTS

1.Uncrate mower

2.Mount front caster assemblies to the front deck using the fasterners provided on the deck.(both sides)

3.Cut the plastic wire ties holding the operator presence levers down.

4.Check tire pressure in all four tires. (rear tires 15 PSI, front tires 20-25 PSI)

5.Check engine oil with dipstick. Add if needed per engine manufactures specifications.(See engine manual)

6.Check hydraulic oil level. Should be an 1.0” below the bottom of the fill tube.

7.Mount the discharge chute to the front deck using the fasteners provided on the deck.

CUTTING HEIGHT

1.Before changine cutting heights make sure the blades are off, key switch is off, and remove spark plug wire or wires.

2.Cutting height ranges from 1 1/2” to 5” in 1/4” increments.

3.Cutting height can be changed three ways. Move one “C” spacer on the front casters, change the blade spacers, or move the wheel motor assemblies.

4.a.To change heights on the rear deck lossen, do not remove, the top two carraige bolts on both sides.(see fig. 1a)

b.Place a jack under the center of the rear deck remove the bottom two nuts on both sides. Then remove the bottom two bolts both sides.(May have to raise the jack slightly to remove bolts.)(see fig. 1b)

c.With the jack raise or lower the rear deck to the desired postion using the chart, on page 7, to ensure proper height.

5

Page 4 Page 6
Page 5
Image 5
Yazoo/Kees KHKW36151, KHKW48171 Safety Transportation, Equipment Setup and Adjustments, Cutting Height
Page 4 Page 6

KHKW36151, KHKW48171 specifications

Yazoo/Kees is a well-known name in the outdoor power equipment industry, particularly noted for its high-quality mowers and lawn care machinery. Among its offerings, two standout models are the KHKW36151 and KHKW48171, both of which exemplify the brand's commitment to performance and durability.

The KHKW36151 is a robust commercial mower aimed at professional landscapers and lawn care businesses. It features a powerful engine that ensures consistent performance even under heavy loads. This model is equipped with a 36-inch cutting deck, allowing for efficient maneuverability in tight spaces while still delivering a clean cut. The KHKW36151 utilizes advanced hydrostatic transmission technology, providing seamless speed adjustments and making it easy to navigate varying terrains. The ergonomic design of the operator station enhances comfort, reducing fatigue during long working hours. Additionally, the mower’s durable frame construction ensures it can withstand the rigors of daily use, making it a reliable choice for any contractor.

On the other hand, the KHKW48171 takes performance to a new level with its 48-inch cutting deck, making it suitable for larger properties and commercial applications. This model is designed for efficiency and speed, boasting a higher horsepower engine that increases productivity. Like its counterpart, the KHKW48171 features hydrostatic transmission that allows for smooth operation and easy control over ground speed. This model is particularly noted for its advanced cutting technology, which enables users to achieve exceptional finish quality regardless of the grass type. The KHKW48171 is also engineered with an emphasis on user comfort, featuring an adjustable seat and intuitive controls that make operation a breeze.

Both models are built with durable materials, ensuring longevity and reliability in various environmental conditions. Key characteristics include extensive safety features, such as automatic blade brakes, to protect the operator during use. Furthermore, Yazoo/Kees provides exceptional customer support and service for both machines, which adds value for professionals who rely on these mowers for their livelihoods.

In summary, the Yazoo/Kees KHKW36151 and KHKW48171 represent the pinnacle of commercial mowing technology, offering robust performance, ergonomic design, and dependable durability. Whether for small yards or expansive commercial properties, these mowers are engineered to tackle the toughest jobs while ensuring operator comfort and satisfaction.
Top Page Image Contents