Yazoo/Kees ZEKW48190 manual Place the Blade-switch in the disengaged position, Maintenance

Models: ZEKW48190

1 84
Download 84 pages 18.35 Kb
Page 38
Image 38
2.Place the Blade-switch in the disengaged position.

MAINTENANCE

 

 

Daily

Weekly

At

Maintenance interval

 

 

mainte-

mainte-

least

 

in hours

 

 

 

nance

nance

once

 

 

 

 

Maintenance

Page

 

 

each

 

 

 

 

Before

After

 

25

50

100

300

 

 

 

 

 

year

 

 

 

 

Check/adjust throttle and choke cables

40

 

 

 

 

 

 

z

 

Check the condition of belts, belt pulleys, etc.

43

 

 

 

z

 

 

z

 

Change the engine oil 1)

57

 

 

 

z

 

z

 

 

Replace the engine oil filter

59

 

 

 

z

 

 

z

 

Clean/replace the spark plugs

38

 

 

 

z

 

 

z

 

Replace the fuel filter

45

 

 

 

z

 

 

z

 

Replace the air filter (paper filter) 2)

44

 

 

 

z

 

 

z

 

Check the caster wheels (every 200 hours)

50

 

 

 

 

 

 

z

 

Clean the cooling fins 2)

-

 

 

 



 

 



 

Replace the air cleaner’s pre-filter 2) (foam)

41

 

 

 

z

 

 

 

z

Check/adjust the mower deck

48

 

 

 

z

 

 

 

z

Check the engine valve clearance4)

-

 

 

 



 

 

 



Perform the 300-hour service 4)

72

 

 

 



 

 

 



Lubricate according to Lubrication Schedule

54

 

 

 

z

z

z

z

z

Check transaxle oil at reservior

 

 

 

z

 

 

 

 

 

Change transaxle oil & filter (200 hours)

 

 

 

 

z

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1)First change after 5-8 hours. When operating with a heavy load or at high ambient temperatures, replace every 50 hours. 2) In dusty conditions,

cleaning and replacement are required more often. 3) For daily use, the machine should be lubricated twice weekly. 4) Performed by authorized service workshop.

z= Described in this manual

= Not described in this manual

WARNING!

Before performing any service or adjustment checklist: 1. Engage the parking brake.

2.Place the Blade-switch in the disengaged position.

3.Turn ignition switch to “OFF” position and remove the key.

4.Make sure the blades and all moving parts have completely stopped.

5.Disconnect the spark plug wire from all spark plugs and place the wire where it cannot come in contact with the plug.

Use protective glasses when doing maintenance work.

English-36

Page 38
Image 38
Yazoo/Kees ZEKW48190 Place the Blade-switch in the disengaged position, Use protective glasses when doing maintenance work