OPERATING INSTRUCTIONS

NOTE: To begin motion the operator must be in the seat and the brake disengaged before the levers can be moved from the neutral slots or the engine will kill.

By moving the levers an equal amount forward or back the mower will move in a straight line in that direction.

Movement of the right lever forward will cause the right wheel to rotate in a forward direction. Movement of the left lever forward will cause the left wheel to rotate in a forward direction. To stop forward travel pull levers back into the neutral position.

To turn right while moving in a forward direction pull the right lever back towards the neutral position, this will slow the right wheel and cause the mower to turn in that direction.

To turn left while moving in forward direction pull the left lever back towards the neutral position, this will slow the left wheel and cause the mower to turn in that direction.

To zero turn pull one lever back beyond neutral while holding the other slightly ahead of neutral. NOTE: The direction of the zero turn will be determined by which lever is pulled back beyond neutral. Thus, left lever back, left turn and opposite for right turn. Use caution when using this maneuver unit can spin very rapidly if one lever is positioned too much ahead of the other.

3.Blade engagement switch: Located on the console. Pull up on switch to engage blades, push down to turn blades off. See page 3

4.Choke control: Located on the console. Push the throttle control all the way forward. Use when starting cold engine do not run choke when engine is warm. See page 3

5.Throttle control: Located on the console. Used to control engine RPM. See page 3

6.Park brake: Located at the left end of the console. Pull lever back to engage the park brake, push lever forward to release brake. NOTE: Use tie downs when transporting unit, the park brake is not enough to hold the unit in place in this situation. See page 3

7.Key switch: Located on the console. The operator must be in the seat, park brake on, motion control levers out in the neutral slots and blade switch off before engine will start. See page 3

8.Fuel shut off valve: Located on the front of console at the top of the kick plate. The valve has three positions left tank, right tank and straight down is the off position. See page 3

9.Pump release valves: Located at the back left corner of the pumps. Used to release the sys- tem so unit may be moved by hand when not running. Tilt the seat up to gain access to the pumps. Rotate valve towards the front of the unit to release the system using a 5/8 wrench. NOTE: Only rotate about a 1/4 of a turn to release system.

10

Page 9 Page 11
Page 10
Image 10
Yazoo/Kees ZKW42171, ZKW42172, ZKW42182 important safety instructions Operating Instructions
Page 9 Page 11

ZKW42171, ZKW42172, ZKW42182 specifications

Yazoo/Kees is a well-known manufacturer in the realm of outdoor power equipment, particularly recognized for its commercial-grade zero-turn mowers. Among its remarkable line-up, the Yazoo/Kees ZKW42171, ZKW42172, and ZKW42182 models stand out for their exceptional performance, durability, and innovative technologies tailored for professional landscaping.

The ZKW42171 is equipped with a robust engine that delivers impressive power and efficiency. This model features a 21-horsepower engine which ensures reliable performance even in demanding mowing conditions. Its heavy-duty steel frame adds to its durability, allowing it to withstand the rigors of frequent use. Notably, the ZKW42171 is designed with a user-friendly control panel, making it easy for operators to access essential functions and manage mowing tasks effortlessly.

The ZKW42172 takes performance a step further with its enhanced power output and innovative features. It boasts a 23-horsepower engine, providing an extra boost for tackling overgrown areas or challenging terrains. This model also incorporates a refined cutting deck that delivers precision cutting and an impeccable finish, making it ideal for professional landscapers who prioritize quality. Ergonomic seating ensures comfort for extended hours of operation, allowing users to focus on the task at hand without fatigue.

Completing the series, the ZKW42182 provides the ultimate solution for those seeking an uncompromising mowing experience. With an impressive 25-horsepower engine, this model stands at the top of the range, designed for maximum productivity. The ZKW42182's innovative suspension system enhances stability and reduces vibration, promoting a smoother ride and improved control on uneven terrain.

In terms of technology, all three models feature intuitive controls that include an advanced hydrostatic transmission, allowing for smooth acceleration and precise speed adjustments. The cutting decks on these models are designed for easy height adjustment, enabling users to adapt to various grass types and conditions. Additionally, the ZKW series incorporates advanced safety features, including automatic blade shut-off when the operator leaves the seat, showcasing Yazoo/Kees' commitment to both performance and safety.

In conclusion, the Yazoo/Kees ZKW42171, ZKW42172, and ZKW42182 models are exemplary machines tailored for professional landscapers, combining power, durability, and innovative technologies. These mowers stand ready to deliver outstanding results, making them a valuable addition to any commercial landscaping fleet.
Top Page Image Contents