INSTALLATION, OPERATION & MAINTENANCE MANUAL

Multi-Pure

Water Guardian Drinking Water

Appliance

The Multi-Pure Water Guardian Drinking Water Appliance, Model MPADC is designed for use on the countertop next to your sink. You can connect it to your existing faucet using the high-tech chrome diverter valve that allows you to easily switch from filtered to unfiltered water.

II. Inspect the Housing

NOTE: The filter cartridge is factory-installed inside the unit housing.

Step 1 Determine a desired location on your countertop for the

 

unit so that the hose can easily be attached to your

housing top

faucet.

 

Step 2 Inspect the unit housing to confirm that the housing top

 

is securely connected to the bottom. If necessary,

turn to close

use the hand tool, shipped with the unit, to tighten the

top.

hand tool

a.With the housing in an upright position, slide the hand tool over the top so that the ridges on the tool fit into the grooves on the housing top.

b.Applying steady pressure, turn clockwise to tighten. Hold the base in place on the countertop while turning the top.

c.Tighten sufficiently so that the o-ring at the bottom of the top is not visible. DO NOT OVER TIGHTEN.

housing base

3