the Level control on each cabinet sets the volume for that cabinet. When used with a microphone connected to one NX25P at the beginning of the chain the Level control
system with multiple cabinets it will be necessary to adjust the bass, Treble, Mid and Bass controls on all individual
MIC GAIN | enclosures. |
|
min max | Signal / Limit LED |
will normally be set to maximum unless it is desired that a particular cabinet be set quieter than the rest. When a line source is used the Level control will set the volume for the enclosure. If there are multiple NX25P enclosures in a system, it will be necessary to set the Levels separately. If using a mixer for the line source, the mixer should
TREBLE
6dB 6
MID
6dB 6
BASS
6 | dB | 6 |
|
LEVEL
dB
00 0
ON
OFF
This dual LED illuminates green when signal is present and red when limiting.
Shield Switch
The Shield switch disconnects the ground connection on the Line In. This may help prevent hum or buzz under some circumstances.
Power LED and Switch
control the level of all the
NX25P enclosures. (When a mixer drives the NX25P
enclosures, the Level control should be set to maximum). If there are multiple NX25P enclosures it may be desirable to set the level control of individual enclosures to less than maximum (if it’s desirable for that enclosure to be quieter).
Treble, Mid and Bass Controls
These controls affect all the sound coming out of a particular NX25P enclosure. These controls do not affect the sound at the Mix Out. In a
POWER | The Power Switch turns the |
| power on and off for the |
| NX25P enclosure, the green |
| LED will illuminate when |
the power is on also indicating a properly functioning fuse.
Voltage Selector Switch
Select the proper voltage for the geographical region in which the NX25P will be used. The unit is set for 115V when used with the standard North American line voltage. For European operation set the unit to 230V. If in doubt of the line voltage please contact your local Yorkville dealer.
1 3 2
MIC IN | MIC GAIN |
1 3 2
LINE IN
Shield
LEVEL
TONE CONTROLS
Bass idreble
M T
5kHz
20 WATTS
30hz/5kHz
2 3 1
180 WATTS
MIX OUT
2