Yorkville Sound YS1030 NX250P - Active Speaker - 200w, 12 inch / 1 inch, Features, Mic In

NX250P - Active Speaker - 200w, 12 inch / 1 inch

The NX250P offers the best value in a 12-inch and horn active loudspeaker enclosure. The enclosure is the same proven design as the NX250 passive loudspeaker and uses the same rugged and reliable speaker components. The biamped 200-watt power module has a minimum of controls yet provides maximum versatility making the NX250P the ideal solution for many applications.

A 3-band EQ, XLR balanced microphone input as will as an XLR / TRS 1/4-inch balanced combi-jack line input on the power module means the NX250P can be easily connected to any source and quickly EQ balanced for the room. An XLR balanced line output allows multiple NX250’s to be linked together for use in an array or for easy distribution around a large room when used as repeater cabinets.

The horn/tweeter amplifier uses two-tier class A/B technology, allowing the horn to produce clean transients to keep up with the high output of the woofer. The woofer, or low frequency, amplifier uses class-H 2-tier amplifier technology. This achieves a lighter weight, more efficient amplifier with higher headroom (and lower operating temperature). Each amplifier has it own limiter to prevent distortion caused by clipping.

The NX250P enclosure, like all enclosures in the NX loudspeaker line, has been designed for maximum versatility. The trapezoid box is ideal for mounting in arrays, or for use as a monitor cabinet (with well-protected inputs and controls). The NX250P can easily be used in any orientation, and close to walls, floors and in close arrays with multiple cabinets. Particular care was taken designing the components to reduce extraneous heat production.

Features

·Ultra-light variable density acoustic foam construction

·Dual purpose full range and wedge monitor format enclosure

·Ultra-clear reproduction throughout bandwidth

·Lightweight, high efficiency, high tech, 200 Watt biamped power module

·combi-jack XLR/1/4-inch TRS input

·An XLR output for easy connection and looping

·Direct microphone input with level control

·Three band overall EQ controls

·12-inch Ceramic Magnet Woofer

·High quality 1-inch High Frequency driver

·Integrated flying hardware (3/8-inch threaded holes)

·Tough, full length metal grille

· Recessed panel

Mic In

The balanced XLR microphone input can be used with any dynamic microphone.

Line In

The balanced XLR/1/4-inch combi- jack input can

be used with any line source such as a CD player or an electronic instrument with a line output. It is always recommended to use balanced sources. This helps prevent the risk of hum or buzz associated with unbalanced connections, especially if the cable is long or the source is operated from a separate AC power connection. Unlike the Mic In, the Line In does not have it’s own level control so connection to the Line In and the Mic In at the same time are not recommended.

Mix Out

To allow operation of multiple NX250P loudspeakers, from one source, this line

output is provided. It should be connected to the Line

In of the next NX250P in the chain. When

connecting multiple NX250P loudspeakers, the last NX250P in

the chain should be turned off first (and on last). Each NX250P should be turned on or off before the previous NX250P in the

chain. This will eliminate unwanted on/off noises.

Mic Gain Control

The microphone level control adjusts the mic level of the loudspeaker. It also adjusts the mic level on all NX250P enclosures in the chain (if multiple NX250P enclosures are used). The main Level control should be set to maximum when the microphone is being used.