Chapter 3 System Installation

Assemble the Mounting Bracket

1. Place the main bracket into the seating and use a spanner to fasten the bracket to the R2
Extender with M5×16 screws
8 and M5 washers
9 provided in the hardware packets;
2. Assemble the main bracket by placing articulation pole
2 to the T-form bracket
1 via a
M8×90
4 screw through the insertion axe and fix with the M8 washer
5 , spring washer
6 and M8 nut
7;

Pole Mounting

1. Install the main bracket and the pole mount bar
3 over the top of the pole by securing the
drill holes of the pole mount bar to the main bracket ones and insert two M8×80
4 screws,
spring washers
6 and washers
5 through the drill holes and main bracket;
Chapter 3 Hardware Installation Page 7