Rinse aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.
Filling with rinse aid
1.Open the container by turning the lid (A) anticlockwise.
2.Add the rinse aid until the container is completely full. The indicator (B) will be completely dark.
3.Top up the rinse aid when the rinse aid indicator light on the control panel illuminates.
If rinse aid refilling is necessary, the rinse aid indicator light will illuminate only in setting mode and at the end of the
washing programme.
During the run of the programme it will remain off.
It is possible to deactivate the rinse aid indicator light (see the following instructions), By default the rinse aid indicator light is active.
Ensure that the lid is closed after every refill.
Do not put liquid detergent in the rinse aid compartment. Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.
A |
BR01 |
B |
|
|
|
|
|
| x | 6 | 5 | 4 | 3 |
|
| ||||
|
|
|
| ||
m | a |
|
|
| 2 |
|
|
|
| 1 | |
|
|
|
|
| |
| BR03 |
|
|
|
|
|
To deactivate the rinse aid indicator light be sure that the dishwasher is off and then proceed as follows:
1.Press INTENSIVE SID 80 | and NORMAL |
programme push buttons simultaneously. |
|
2.While keeping the programme push buttons
INTENSIVE SID 80 | and | NORMAL | pressed | |
switch on the dishwasher by pressing the |
| |||
push button. |
|
| ||
The | indicator light comes on. |
| ||
At the same time, the indicator lights of the |
| |||
INTENSIVE SID 80 | and | NORMAL | push buttons | |
start flashing. |
|
|
| |
SO390
9
