Zanussi DE 6954 Deactivation/activation of the inflow of rinse aid, Rinse aid dispenser type B

Models: DE 6954

1 24
Download 24 pages 10.02 Kb
Page 7
Image 7

Filling with rinse aid

(Rinse aid dispenser type B)

1.Open the container by turning the lid (A) anticlockwise.

2.Add the rinse aid until the container is completely full. The maximum level for filling is indicated by "max".

Top up with rinse aid when the rinse aid indicator light on the control panel illuminates.

If you are using dishwasher detergent that includes the rinse aid function, it is necessary to deactivate the inflow of rinse aid, in order to avoid a double dosage.

BR01

BR13

Deactivation/activation of the inflow of rinse aid

(The dishwasher must be switched off)

When the inflow of rinse aid has been deactivated, also the rinse aid indicator light on the control panel is automatically deactivated.

1.

Press the On/Off push button.

2.

Press simultaneously function push buttons 2 and 3, until

Ensure that the lid is closed after every refill.

Adjusting the dose

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (C) (position 1 minimum dosage, position 6 maximum dosage).

Increase the dose if there are drops of water or lime spots on the dishes after washing.

The dose is factory set in position 5.

the indicator lights of the function push buttons 1, 2 and 3

start flashing.

3. Press the function push button 2, the indicator lights of

function push buttons 1 and 3 turn off while the indicator

light of the function push button 2 goes on flashing, the

digital display indicates the current setting.

Inflow of rinse aid deactivated

Reduce it if there are sticky whitish streaks on the dishes.

BR02

Inflow of rinse aid activated (factory setting)

4.To change the setting, press the function push button 2 again, the digital display indicates the new setting.

5.To memorise the operation, switch off the dishwasher by pressing the On/Off push button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.

Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.

Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

7

Page 7
Image 7
Zanussi DE 6954 manual Deactivation/activation of the inflow of rinse aid, Rinse aid dispenser type B