The wire, which is coloured blue, must be connected to the terminal, which is marked with the letter N or coloured black.

The wire, which is coloured brown, must be connected to the terminal, which is marked with the letter L or coloured red.

Ensure that the cable does not become trapped when pushing the appliance into position.

If a moulded plug is fitted.

In the event of replacing a fuse in the plug supplied a 3 amp ASTA approved fuse to B.S. 1362 must be fitted.

IMPORTANT!

The fuse cover must be refitted when changing the fuse. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been obtained and fitted.

Connecting to gas supply

This appliance is designed to be installed with an appliance flexible connection only.

Supply piping should not be less than R3/8. Connection is made to the Rc ½ (½” B.S.P.) female threaded entry pipe located just below the hob level on the rear left hand side of the appliance.

IMPORTANT!

ONLY LIQUID SEALANTS TO BE USED WHEN INLET GAS PIPE IS FITTED I.E.: DO NOT USE P.T.F.E. SEALANT TAPE.

Carry out a gas tightness test after connecting to the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated.

38

Take into account that it must be possible to pull the appliance forward sufficiently. Ensure the hose does not become trapped when pushing the appliance into position.

IMPORTANT!

FLEXIBLE TUBING USED MUST COMPLY WITH BS.669 CURRENT EDITION.

Fitting the stability chain

It is recommended that if the appliance is to be installed with a flexible supply pipe, a stability chain be fitted and is available from your supplier (see Important Safety Requirements). These instructions should be read in conjunction with any leaflet packed with the stability chain.

1.Place the appliance in its intended position and level appliance.

2.Mark a position 100mm from the top of the rear right hand corner.

3.Measure down 150mm from this point. This gives the position of the wall anchor point for the stability chain.

Page 38
Image 38
Zanussi FH10 user manual If a moulded plug is fitted, Connecting to gas supply, Fitting the stability chain

FH10 specifications

The Zanussi FH10 is a remarkable appliance in the realm of modern home appliances, particularly recognized for its efficient performance and user-friendly features. This versatile washing machine dryer combo is designed to fit seamlessly into various living spaces, making it an ideal choice for both small apartments and larger homes.

One of the standout features of the Zanussi FH10 is its impressive capacity. With the ability to handle large loads of laundry, it caters to the needs of busy households. This appliance can accommodate up to 10 kg of washing, allowing users to wash more clothes in one go, saving both time and energy. This is particularly beneficial for families or those who frequently have large loads of laundry.

The FH10 utilizes advanced washing technologies that enhance its performance. The innovative sensor drying technology adjusts the drying time based on the moisture levels in the drum. This ensures that clothes are not over-dried, preserving their quality and saving energy. In addition, the washing machine comes equipped with a range of washing programs tailored to different fabric types and cleaning needs, including delicate, quick wash, and heavy-duty cycles.

Another noteworthy characteristic of the Zanussi FH10 is its efficient energy rating. Designed to minimize energy consumption, this appliance not only helps reduce electricity bills but also contributes positively to environmental sustainability. The machine's effective cleaning performance, combined with its energy efficiency, positions it as a responsible choice for eco-conscious consumers.

The user interface of the Zanussi FH10 is intuitive and easy to navigate, featuring a clear display and simple controls. Users can easily select their desired program and initiate the washing or drying cycle with just a few button presses. Additionally, the machine operates quietly, making it convenient for use during the night or in shared living spaces.

To enhance convenience, the FH10 also boasts a delay start feature, allowing users to schedule washing and drying cycles at their convenience. This functionality is especially useful for managing laundry around a busy schedule. The compact design of the Zanussi FH10, combined with its multifunctionality, makes it a valuable addition to any home, particularly for those with limited space.

In conclusion, the Zanussi FH10 stands out for its practical features, advanced technologies, and efficient performance. It is a robust choice for consumers looking for a reliable washing machine dryer combo that meets the demands of modern living while being gentle on both fabrics and the environment.