Zanussi 200179, NRG800, NRG810, 200177 Zanussi, Productivity/h full module, chromium plated

�The chrome plate ensures that energy is transferred directly into the food and not towards the operator.

�Main connections can be via the base or the rear of the unit.

�All gas appliances are supplied for use with natural gas, with LPG conversion jets supplied as standard.

�Very quick heat-up time to maximum temperature.

�Full module units have separate controls for each ½ module of the cooking surface to allow different temperatures for each ½ module and heating of just one ½ module for cooking small quantities, thus saving energy.

�The special design of the control knob system guarantees against water infiltration

�All top models can be easily mounted on refrigerated base, open base cupboards, bridging supports or cantilever systems.

�Removable splashback in stainless steel and scrapers with smooth/ribbed blades included as standard allows for an easier and faster cleaning process.

�IPX5 water protection.

*In accordance with H regulations for gas models belonging to Class B11 (power over 14 kW), it is necessary to install a chimney (if installed under a hood) or chimney and draft diverter if the waste gases are vented directly outside.

Productivity/h (full module, chromium plated)

�210 Hamburger fresh 100 gr240 Pilard of veal 80 gr

�336 Sliced oubergine 1 cm

�168 Sausages 100 gr cut lengthways

�300 Sliced zucchini 1/2 cm

�112 Pork ribs 160 gr

�240 Sliced turkey 100 gr

�108 Sliced salmon 200 gr

FULL MODULE GAS FRY TOPS-MANUAL

N 900

Productivity/h (full module, mild steel)

�252 Hamburger fresh 100 gr

�360 Pilard of veal 80 gr

�384 Sliced oubergine 1 cm

�168 Sausages 100 gr cut lengthways

�300 Sliced zucchini 1/2 cm

�112 Pork ribs 160 gr

�240 Sliced turkey 100 gr

�108 Sliced salmon 200 gr

OPTIONAL ACCESSORIES
ACCESSORIES		MODELS
	NRG800		NRG810
	200177		200179
2 SIDE COVERING PANELS FOR TOP-D=900MM	206278		206278
CHIMNEY UPSTAND 800MM	206304		206304
DRAUGHT DIVERTER WITH 120 MM DIAMETER	206126		206126
FLUE CONDENSER FOR 1/2 MOD. DIAM.120MM	206155		206155
FRONTAL HANDRAIL 1200 MM	206191		206191
FRONTAL HANDRAIL 1600 MM	206192		206192
FRONTAL HANDRAIL 400 MM	206166		206166
FRONTAL HANDRAIL 800 MM	206167		206167
JUNCTION SEALING KIT	206086		206086
LARGE HANDRAIL(PORTIONING SHELF)400 MM	206185		206185
LARGE HANDRAIL(PORTIONING SHELF)800 MM	206186		206186
PAIR OF COVERING STRIPS FOR END ELEMENTS	206234		206234
PRESSURE REGULATOR FOR GAS UNITS	927225		927225
REAR FLUE UPSTAND FOR SMALL CHIMNEY	206159		206159
SCRAPER FOR RIBBED PLATE FRY TOP			164257
SCRAPER FOR SMOOTH PLATE FRY TOP	164255		164255
SIDE HANDRAIL-RIGHT/LEFT HAND	206165		206165
STAND/SUPPORT 400 MM	206183		206183
STAND/SUPPORT 800 MM	206184		206184
WATER COLUMN EXTENSION FOR 900 LINE	206290		206290	ZANUSSI
WATER DRAIN FOR FRY TOP FULL MODULE	216153		216153
WATER COLUMN WITH SWIVEL ARM	206288		206288
				P R O F E S S I O N A L
WATER DRAIN FOR FRY TOP HALF MODULE	206153		206153

www.zanussiprofessional.com

BACI4 2009-11-09 The Company reserves the right to alter technical specifications without prior notice.