USE OF YOUR APPLIANCE
The control panel
Never turn the programme selector when the appliance is working.
2 1 3 4
1 ON/OFF pushbutton " 
"
Press the on/off pushbutton, the programme starts : the control lamp lights on.
2 Control lamp
The control lamp lights on when the appliance is working (on/off pushbutton " 
" pressed). It lights off when the cycle is finished (programme selector on a stop position "I").
3 Half load pushbutton "
"
This pushbutton allows to wash small quantity of linen not much soiled (2,5 kg) only on the cotton programmes.
4 Rinse hold pushbutton "
"
Press this button to leave the water in the drum after the wash cycle is completed. This works on all the washing programmes. The clothes are left suspended in water after the final rinse to prevent the formation of creases.
56
5 Programme selector
It enables to select the most adapted programme to the nature and degrees of soil of your laundry. Turn the programme selector clockwise to select the chosen programme.
The programme selector indicates each pro- gramme phase as it takes place.
At the end of the programme, the appliance stops automatically on a stop position "I" for all the programmes or on a rinse hold position " " if the rinse hold pushbutton is selected.
Never turn the programme selector anticlockwise.
6 Temperature selector
It enables to choose the most adapted temperature between cold (
) and 90°C.
Choose the temperature which corresponds to the chosen programme, with the help of the indica- tions or the programme table, according to the fibers and the fastness of the colours.
26
