Zanussi TC 180 Installation

- 16 -

You can install this dryer in a number of different ways.

We will show you the most suitable of these. Whichever

way you install it, here are some points to bear in mind:

• Always ensure that the dryer is level for optimum

functioning.

• The temperature in the room should not exceed

+35° C when the dryer is operating. If it does,

open a door or window while the dryer is on. The

dryer uses the air in the room for cooling.

• The area around the dryer should be as dust-free

as possible.

• If you install the dryer with its door hinge side

towards a wall, or next to a cupboard or wall unit

which is more than 370 mm deep, you will need

to leave a space on the hinge side at least 30 mm

wide. This is to allow the door to open wide enough

for removing the water tank.

• Ensure the air ducts are not obstructed.

If you prefer to install your dryer on a worktop, you must

anchor it at the top rear to prevent it from tipping forwards.

Method:

1. Begin by placing the dryer on the worktop in the

position where it is to be installed.

2. Level the dryer with the aid of its adjustable feet.

3. Mark the position for the hook on the wall. The

correct place is opposite the centre of the left-

hand bracket on the top rear of the dryer.

Drill a hole for a 8 mm diameter plastic wall plug.

4. Screw the hook (1) into place. Once in place, the

“eye” (aperture) of the hook needs to be 40 mm

from the wall.

5. Position the dryer so that the eye is correctly

aligned in the bracket.

6. Fit the pin (2) through bracket and eye and lock it

in place with the split-pin (3).

The adjustable feet must not be removed,

they ensure that there is adequate ventilation

underneath the dryer.

Installation