Operating Sequence
Before using your tumble dryer for the first time, we recommend you place a few damp cloths inside the appliance and dry for 20 minutes.
There may be dust inside a brand new tumble dryer.
Drying
1.Connect the appliance.
2.Open the door.
After each use
•Switch the appliance off by releasing the ON/OFF button 
. The
•Clean the filters (see page 9).
•Empty the water reservoir (see page 10).
Important!
If the drying programme has to be stopped before it reaches the end, we recommend that you turn the
P1149 |
P1108 |
programme selector dial to position (cooling) and wait until the end of this phase before removing the laundry. This will avoid a
Modifying the programme
To change a programme which is running without opening the door, first depress the ON/OFF button 
and then turn the time selector dial to the required time. Press the ON/OFF button again.
3.Load the items one at a time, shaking them out loosely.
4.Close the door. Please check the laundry does not get caught between the door and filter.
5.Press the ON/OFF button 
: the
6.Select the drying time.
7.If required, press the low temperature button 
or the Cool Tumble button 
.
8.Press the Start button 
: the machine starts operating .
The drum turns alternately in both directions during drying.
All drying programmes end with a 10 minute cooling phase (position 
on selector dial).
The machine stops automatically at the end of this phase.
9.Release the ON/OFF button (the
7
