7
ENGLISH
1 Programme Chart
This will help you to select the correct time or
programme for drying.
2 Water container
When the tumble dryer is being used,
condensation is collected in a special container.
To empty container, please refer to ‘Maintenance’
chapter.
3 Door opening button
To open door, press this button. Should the door
be opened while appliance is working, the tumble
dryer will stop functioning. Press start button to
resume drying after closing the door.
4 Low Temperature Button
Press this button to reduce the temperature when
drying synthetics with a time controlled
programme.
5 Buzzer OFF button
The buzzer will sound after drying (during the
anti-crease phase) for 30 minutes unless it is
switched off by depressing this button.
Important: When the water container is full, the
buzzer will sound for 1 minute, evenif you have
depressed the button .
6 Start button
After selecting the programme or drying time
depress this button to start the appliance.
Should the door be opened while appliance is
drying, the START button has to be
depressed again after closing the door to
allow the programme to continue.
This button must be depressed also after a
power failure and after having re-inserted the
water container, if it has been emptied during the
drying programme.
7 “Drying” light
This light indicates that the machine is
performing the drying programme.
8 “Cooling” light
This light will illuminate when the cooling phase
is in operation.
A cooling phase of 9 minutes is performed at the
end of the drying programme and before the anti-
crease phase.
9 “End of programme” light
This light flashes at the end of the programme
(after the cooling phase) and continues to flash
during the anti-crease phase to remind you that
filter needs cleaning and water container must be
emptied. It goes out when you open the door or
turn the programme selector dial to “0”.
10 “Water container full” light
This light flashes when the water container is full
and when drying is completed.
Control panel
AUTOREVERS TCS 674E