Operating sequence
Before starting up for the first time it is advisable lo load a few moist cloths into the dryer and to let it run for about 20 minutes. This ensures that no dust and dirt is left in the drum.
1. Load the laundry
Open the door.
Load the items one at a time, shaking them out loosely and close the door.
Please check the laundry does not get caught between the door and filter.
4. Start the machine
Depress 
, the
5. When drying is completed
ENGLISH
P1104 |
P1108 |
The machine stops automatically. Turn the selector dial to “O”, the
If the laundry is still too damp, select a further brief drying time, bearing in mind that during the last 10 minutes the dryer carries out the cooling and anti- crease treatment phase.
Clean the filters after every drying programme (see page 13).
2.Depress button 
,if required
3.Select the drying time
Turn the selector dial clockwise to the desired time, in the high or low temperature section, depending on the laundry.
M0045S |
This will ensure correct functioning of the appliance.
11
