Zanussi TLE 1116 W manual Soil Level button, Options button, START/PAUSE button, SKIP/RESET button

RINSE HOLD position: when you choose this option, the machine will not drain the water of the last rinse which could crease the laundry.

At the end of the cycle, the light "END" will light to indicate that the water must be drained. To complete the cycle, choose one of the following options:

•Draining and spin:

-Choose a type of laundry with the FABRICS button and then press the SKIP/RESET button once, so as to cause the SPIN light to illuminate (you can also choose the spinning speed by means of button 5), then press the START/ PAUSE button.

•Drain only:

-Choose a type of laundry with the FABRICS button and then press the SKIP/RESET button once, so as to cause the DRAIN light to illuminate, then press the START/PAUSE button.

6 SOIL LEVEL button

NORMAL

When selecting a programme, the normal option is proposed by the appliance.

However, by pressing the SOIL LEVEL button repeatedly, the soil level can be changed (levels depend on the soiling of the laundry).

HEAVY SOIL

Suitable for very soiled laundry (only for cotton and synthetic fabrics).

By selecting this option, the washing time is increased by 10 minutes.

QUICK

Suitable for lightly soiled clothes.

This function cannot be used on the wool and hand-wash programmes.

The washing time is reduced on the basis of the type of FABRICS and TEMPERATURE which have been selected.

7 OPTIONS button

Press this button to select the following options:

PREWASH: select this option if you wish your laundry to be prewashed before the main wash (not available for wool and hand-wash cycle).

The prewash ends with a short spin at 650 rpm in programmes for cotton and synthetics fabrics, whereas in the programme for delicate fabrics the water is only drained.

EXTRA RINSE: this option can be selected with all programmes except the wool programme and

hand-wash. The machine performs 4 rinses instead of 3.

8 START/PAUSE button

This button has two functions:

•Start: after you have selected the desired programme and options, press this button to start the washing machine. The light above the button will stop flashing and remain lit.

•Pause: when you press this button again, the programme in progress is interrupted. The light above the button will start flashing. To restart the programme, press the button again.

When you PAUSE the cycle, the DOOR light goes out, and it becomes possible to open the lid, provided

•the washing machine is not on the heating phase;

•the level of the water is not high;

•the drum is not turning.

Important!

You must set the washing machine to PAUSE before you make any change in the programme in progress.

9 SKIP/RESET button

This button performs two functions:

-Clears the memory.

-Selects special programmes.

At the end of every programme the RESET button must be pressed at least once to clear the pro- gramme memory.

Selecting a special programme:

A wash programme must be selected in the normal way (START button not pressed).

A normal wash cycle consists of the following phases WASH - RINSE - SPIN and is confirmed by the illumination of the corresponding LED's.

7