Your New Washer-Dryer

Your new washer-dryer, fitted with the Zanussi “JET SYSTEM”, meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption.

Even small loads are washed “economically” because the amount of water used is regulated automatically according to the load and type of fabric.

It is gentle with your laundry, simple to use and easy to care for.

The special wool programme with its new delicate wash system treats your woollens with extreme care.

The anti-unbalance device ensures that the machine remains stable when spinning.

Automatic cooling of the wash water to 60°C before draining, with the 90°C programme. This reduces thermal shock to fabrics, helping to prevent creasing.

The two drying programmes will give your wash that soft, relaxed feel whatever the weather.

Ecological hints

To save water and energy and help protect the environment, we recommend that you follow these hints:

Adjust the quantity of detergent according to the hardness of your water supply, the amount of laundry and the degree of soiling.

Select a “Quick” programme for lightly soiled laundry.

A programme without prewash is sufficient for normally soiled laundry.

Try to load the maximum drying capacity of the machine as small loads are uneconomical.

Always load well spun laundry. The higher the spin speed, the lower the electricity consumption and the shorter the drying times.

In the interest

of the environment

Materials marked with the symbol are recyclable.

Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance.

When the appliance is to be scrapped, cut off the power supply cable and make the door lock device unusable to prevent young children from being trapped inside.

Help to keep your country tidy - use authorised disposal sites for your old appliance.

How do we help to protect the environment? We use recycled paper!

Important

Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.

If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the wash load manually and select a spin programme. For more detailed information see the section headed "Something Not Working".

4

Page 4
Image 4
Zanussi WJD 1457 W, WJD 1357 S, WJD 1257 S, WJD 1257 W manual Your New Washer-Dryer, Ecological hints, Interest Environment