Zanussi ZBF 361 manual Before the First Use, Safety Thermostat, Cooling fan

The Safety Thermostat

This oven is provided with a safety thermostat. In case of malfunctioning of the main thermostat, and consequent over-heating, the safety device will stop the power supply to the appliance. If this happens, call your local Service Force Centre. Under no circumstances should you attempt to repair the appliance yourself.

The cooling fan

The cooling fan operates during cooking. Air is expelled through vents between the oven door and the control panel, as shown in the diagram.

The cooling fan may run on after the oven is switched off to keep the controls cool. This is quite normal.

Before the First Use

Remove all packaging, both inside and outside the oven, before using the oven.

Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is quite normal.

The oven will work only if the time of day has been set.

)1. Set the time of day with the electronic programmer (see chapter "Electronic Programmer").

2.Switch the oven function control knob to fan cooking .

3.Set the thermostat control knob to MAX.

4.Open a window for ventilation.

5.Allow the oven to run empty for approximately 45 minutes.

This procedure should be repeated with the grill function for approximately 5-10 minutes.

FO 2259

Fig. 4

6