Zanussi ZBM 879 Safety and Energy Saving Functions, To programme the Oven to switch on and off

Models: ZBM 879

1 28
Download 28 pages 10.54 Kb
Page 11
Image 11

To programme the Oven to switch on and off

Φ1) Carry out the cooking duration setting as described

in “To programme the Oven to switch off”.

2) Press button . The "End of Cooking" function

will be selected, and the relevant pilot lamp will flash. The control panel will display the end of cooking time (that is, the actual time + cooking duration).

3) Press button or within 3 seconds to select the required end of cooking time.

4)The programmer will wait 3 seconds, then the cooking duration time will appear on the control panel. When the oven switches on, the display will revert to the time of day.

If you press button the display will show the end of cooking time.

5)The oven will switch on and off automatically. The end of cooking will be marked by an acoustic alarm.

6)To switch off the acoustic alarm, press any button between 4 and 9. The pilot lamps will go off.

To cancel the programme, simply cancel the

Duration Time.

Press button

 

and, while keeping it pressed,

Φpress button

 

too.

If this operation is carried out while a program is running on, the oven will NOT switch off.

Safety and Energy Saving Functions

Safety Cut-Off Function

If no changes are made to the oven settings, the oven will switch off automatically according to the following table:

If temperature setting is:

the oven will switch off:

 

 

250°C or more

after 1 1/2 hours

from 120 up to 250°C

after 5 hours

 

 

less than 120°C

after 12 hours

 

 

Residual Heat Function

When a Cooking Duration time is set, the oven will automatically switch off a few minutes before the end of the programmed time, and use the residual heat to finish your dishes without energy consumption. The oven pilot light will remain on until the Cooking Duration time is over. This function will not operate when the Cooking Duration time is less than 15 minutes.

Child Safety Function

To avoid children switching on the oven, it is possible to lock the oven controls.

1)

Turn off the oven by pressing button

 

.

 

Φ2)

Press buttons

and

 

at the same time and

keep them pressed for about 3 seconds. A flashing dot will be displayed after the time of day.

3) The oven is now locked. Neither oven functions nor temperatures can be selected.

To unlock the oven:

ΦPress buttons and at the same time and keep them pressed for about 3 seconds. The flashing dot will go off. The oven can now be operated.

11

Page 11
Image 11
Zanussi ZBM 879 Safety and Energy Saving Functions, To programme the Oven to switch on and off, Safety Cut-Off Function