THE DUAL GRILL
USES OF THE DUAL GRILL
CAUTION - ACCESSIBLE PARTS MAY BECOME HOT WHEN THE GRILL IS IN USE. CHILDREN SHOULD BE KEPT AWAY.
The grill is a dual circuit grill which means that the full area of the grill can be used or for economy purposes the centre section only can be used when cooking smaller quantities of food.
SELECTING THE GRILL
Select the grill function for full grill
Select the grill function for centre section only
Turn the temperature control knob to the right as far as it will go. This is the hottest setting.
To use the grill at lower settings, turn the temperature control knob so that 110°C or 150°C on the knob lines up with the off dot on the panel.
lTHINGS TO NOTE
The cooling fan will operate in conjunction with the grill. For more details on the operation of the cooling fan see page 9.
NOTE
THE GRILL DOOR MUST BE LEFT OPEN DURING GRILLING.
If the grill door is accidentally closed during grilling a safety device incorporated in the cooker will cut out the grill.
The top oven cannot be operated when the grill is in use. If the grill and top oven controls are selected at the same time, only the top oven will operate.
The inner grill element may appear to glow slightly brighter than the outer element. This is quite normal.
THE GRILL PAN AND HANDLE
The grill pan is supplied with a removable handle.
To attach the handle, place the wirework under the cut out in the pan so that the metal plate hooks over the top of the grill pan.
Slide the handle to the left and over the central bump on the grill pan.
Ensure the handle is correctly located. It is not necessary to remove the grill pan handle during grilling.
To remove the handle, slide the handle to the right and lift the handle away from the cut out on the grill pan.
Place the grill pan on the shelf so that the pan is positioned centrally beneath the grill.
To check the progress of the food being grilled, the grill pan should be withdrawn on the shelf to attend to food during cooking or the carrier shelf can be lifted away from the cooker and rested on a heat resistant work surface.
19
