AUTOMATIC CONTROL

You can only use the automatic control for the main oven. When you use the automatic controls for the first time it’s probably best to choose a time when you are at home. That way you can check to make sure you’ve set everything correctly and you’ll feel much more confident when you are away from home in the future.

SETTING THE CONTROLS FOR

AUTOMATIC USE

This is very easy. All you have to do is work through the steps below. The clock will work out the rest for itself.

1 Is the electricity supply on?

2 Is the clock

To adjust turn the selector knob

showing the

to ‘Manual’ then to ‘Clock’. Turn

correct time?

the setting knob in either

 

direction.

3How long will the food take to cook?

Turn the selector knob to ‘Cook’. Then turn the setting knob until the length of time you want the food to cook shows in the display. The maximum cooking time is 10 hours. ‘Auto’ will show in the display.

4

What time do

Turn the selector knob to ‘Stop’.

 

you want the

Turn the setting knob until the

 

food to be

time the oven is to switch off

 

cooked by?

shows in the display. The

 

 

cookpot (

) will go out.

 

 

The ‘Stop’ time must not be

 

 

more than 23 hours 59 minutes

 

 

from the

time of day. For

 

 

example if the time of day is 9.00

 

 

am the latest ‘Stop’ time will be

 

 

8.59 am the next day.

5

Set to

Turn the selector knob to ‘Auto’.

 

automatic.

 

 

6

Turn on the

Turn the oven control to the

 

oven control.

required temperature.

The time shown on the right gives an example of setting the automatic controls when the time is 9.00 am, the food is to be cooked for 2½ hours and the food is needed at 6.00 p.m. (1800 hours).

The clock will work out what time the oven will switch itself on and it will turn the oven off at the end. Once the automatic sequence is finished there will be an alarm to remind you that you need to set the oven for manual operation. To do this turn the selector knob to ‘Manual’. Turn off the oven control.

If you change your mind and want to cancel a programme that you have set simply turn to ‘Clock’ and then to ‘Manual’.

9

Page 9
Image 9
Zanussi ZCM 8021 manual Automatic Control, Setting the Controls for Automatic USE