Remember to wash the defrost cleaner in hot soapy water at regular intervals. Dry throughly before replacing.

Freezer

When the frost has reached a thickness of up to 4mm it can be removed using the ice scraper provided with the appliance. During this operation it is not necessary to disconnect the appliance from the mains and remove the food. Never use metal tools for this operation.

For complete defrosting (once or twice a year) proceed as follows:

-turn the thermostat dial to the ÇOFFÈ position (O) or disconnect the appliance from the mains.

-Remove any food from inside the freezer and fridge, wrap it in several sheets of newspaper and store in a cool,dry place.

-Leave the door open, place a basin on the top shelf of the refrigerator compartment, under the drain hole, lift the plug as shown in the figure..

-Clean and dry thoroughly.

-Replace the scraper in one of the drawers .

-Reconnect the appliance to the mains or reset the thermostat to a functioning position.

-After letting the appliance run for a least half an hour, replace the previously removed food into the compartment.

Important

When defrosting the freezer, the fridge is also controlled by the thermostat and will not be operational during this period. A temperature rise of the frozen food packs, during defrosting, may shorten their safe storage life.

PR138

10

Page 10
Image 10
Zanussi ZD 50/33 R manual Freezer