Installation
•Check your dishwasher for any transport damage. Never connect a damaged ma- chine. If your dishwasher is damaged con- tact your supplier.
•All packaging must be removed before use.
•Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person.
•For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way.
•Never use the dishwasher if the electrical supply cable and water hoses are damaged;
Control panel
or if the control panel, work top or plinth area are damaged such that the inside of the ap- pliance is freely accessible. Contact your local Service Force centre, in order to avoid hazard.
•All sides of the dishwasher must never be drilled to prevent damage to hydraulic and electric components.
WARNING!
For electrical and water connection carefully follow the instructions given in specific para- graphs.
1.Programme selector dial and On/Off switch
2.Start/cancel button
3.Delay start button
4.Indicator lights
5.Programme selector indicator light
4
