17
Electrical Connection
Any electrical work required to install this
apliance must be carried out by a qualified
electrican or competent person.
This appliance must be earthed.
The manufacturer declines any liability should
these safety measures not be observed.

Electrical Requirements

Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance
rating plate.
The appliance is supplied with a 13 amp plug fitted. In
the event of having to change the fuse in the plug
supplied, a 13 amp ASTA approved (BS 1362) fuse
must be used.
Should the plug need to be replaced for any reason.
The wires in the mains lead are coloured in accord-
ance with the following code:
Green and Yellow : Earth
Blue : Neutral
Brown : Live
The wire coloured green and yellow must be con-
nected to the terminal marked with the letter E or by
the earth symbol or coloured green and yellow.
The wire coloured blue must be connected to the
terminal marked N or coloured black.
The wire coloured brown must be connected to the
terminal marked L or coloured red.
Upon completion there must be no cut, or stray
strands of wire present and the cord clamp must be
secure over the outer sheath.
Important:
If the mains supply cable is damaged, it must be
replaced by a cable available from your local Service
Force Centre.`