INSTALLATION

Important

IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE.

Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions on “Door reversal”.

Important

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

Positioning

This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating plate, which is located at the left on the inside of the appliance.

The following table shows which ambient temperature is correct for each climate classification:

SN +10°C to + 32°C

N+16°C to + 32°C

ST +18°C to + 38°C

T+18°C to + 43°C

It should be located in a dry atmosphere, out of direct sunlight and away from extreme temperature e.g. not next to a boiler or radiator, or in a very cold room e.g. an outhouse, where the temperatures may fall below 10°C (50°F). If these temperatures are exceeded i.e. colder or warmer, then the appliance may not operate correctly.

You should also ensure that air can circulate freely around the back and the top of the cabinet. There must also be at least 100 mm (4”) distance between the top of the cabinet and any overhanging kitchen furniture

(A). Ideally, the appliance should not be positioned beneath overhanging furniture (B).

There should also be a gap of 25 mm either side of the appliance. Do not obstruct the space underneath. The back of the cabinet may be placed close to the wall but must not touch it. DO NOT install in places with restricted ventilation.

Adjust the level of the appliance by screwing out the adjustable foot, or feet, at the bottom of the cabinet using your fingers or a tool (see figure).

Rear spacers

In the bag with the documentation, there are two spacers which must be fitted as shown in the figure.

Slacken the screws and insert the spacer under the screw head, then re-tighten the screws.

100 mm

 

A

B

10 mm

10 mm

NP00

 

D200

 

D594

15

Page 14 Page 16
Page 15
Image 15
Zanussi ZEBF 336 manual Installation, Positioning, Rear spacers
Page 14 Page 16

ZEBF 336 specifications

The Zanussi ZEBF 336 is a modern and efficient built-in refrigerator offering advanced technologies and features that cater to the needs of today’s consumers. This appliance combines style with practicality, making it a popular choice for those looking for both performance and aesthetics in their kitchen.

One of the standout features of the Zanussi ZEBF 336 is its impressive storage capacity. With a net volume of 310 liters, it provides ample space to store all your groceries, from fresh produce to beverages and leftovers. The flexible storage configuration, which includes adjustable shelves and door bins, allows users to customize the interior layout according to their needs, ensuring easy access to all items.

Incorporating advanced cooling technologies, the ZEBF 336 is designed to maintain optimal temperatures and humidity levels within the refrigerator. The No Frost technology is a significant advantage, preventing ice build-up and eliminating the need for manual defrosting. This not only saves time but also ensures that the appliance operates efficiently, helping to keep energy consumption low.

Energy efficiency is another important characteristic of the Zanussi ZEBF 336. Rated with an impressive energy efficiency class, this refrigerator consumes less power compared to older models, translating to lower electricity bills and reduced environmental impact. The appliance is engineered to minimize energy waste while delivering reliable refrigeration performance.

The temperature control mechanism is user-friendly, featuring easy-to-use electronic controls that allow for precise adjustments. The LED lighting inside the refrigerator provides excellent visibility, making it easy to locate items even in low light conditions. Additionally, the ZEBF 336 is equipped with a special Super Cool function, which rapidly lowers the temperature to quickly chill newly added groceries, preserving their freshness.

The design of the Zanussi ZEBF 336 is sleek and contemporary, with a stainless steel finish that adds elegance to any kitchen decor. Its built-in design allows for seamless integration into cabinetry, providing a clean and streamlined look. Furthermore, the appliance operates quietly, ensuring that it does not disrupt the peaceful atmosphere of your kitchen.

In summary, the Zanussi ZEBF 336 is a well-rounded built-in refrigerator that excels in efficiency, storage capacity, and innovative features. Its No Frost technology, energy efficiency, and user-friendly controls make it an excellent choice for those in need of a reliable and stylish refrigeration solution for their home.
Top Page Image Contents